|
|
PDF HMC340LP5 Data sheet ( Hoja de datos )
| Número de pieza | HMC340LP5 | |
| Descripción | GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER/ 1.7 - 4.5 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC340LP5 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
v00.1203 HMC340LP5
MICROWAVE CORPORATION
GaAs MMIC SMT DOUBLE-BALANCED
DUAL MIXER, 1.7 - 4.5 GHz
12
Typical Applications
The HMC340LP5 Dual Mixer is ideal for:
• Wireless Infrastructure
• Wireless Local Loop
• Image Reject Mixer
• I/Q Modulator
• SSB Modulator
Functional Diagram
Features
Conversion Loss: 8.0 dB
LO/RF Isolation: 45 dB
LO/IF Isolation: 33 dB
Input IP3: +20 dBm
Conversion Gain Balance: 0.1 dB
5 x 5 x 1 mm QFN SMT Package
General Description
The HMC340LP5 is a double-balanced dual
mixer covering 1.7 - 4.5 GHz RF/LO range. This
passive MMIC mixer is constructed of GaAs
Schottky diodes and on-chip baluns. The device
can be used as an upconverter, downconverter,
biphase (de)modulator, or phase comparator.
The mixer symmetry of the HMC340LP5 makes
it an ideal candidate for single sideband or image
rejection applications. The consistent MMIC
performance will improve system operation
and assure regulatory compliance. A low cost,
leadless 5x5 mm QFN surface mount package
(LP5) houses the dual MMIC mixer IC.
Electrical Specifications, TA = +25° C, As a Function of LO Drive
Parameter
LO = +13 dBm
IF = 100 MHz
Min.
Typ.
Max.
Min.
Typ.
Frequency Range, RF & LO
1.7 - 4.5
3.4 - 3.8
Frequency Range, IF
DC - 1.5
DC - 1.5
Conversion Loss
8 10
8
Conversion Gain Amplitude Balance
0.10 0.25
0.10
Noise Figure (SSB)
8 10
8
LO to RF Isolation
30 45
40 47
LO to IF Isolation
25 33
33 38
IP3 (Input)
20 23
1 dB Gain Compression (Input)
12 13
Max.
10
0.25
10
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
12 - 160
* Unless otherwise noted, all measurements performed as single channel downconverter.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
MICROWAVE CORPORATION
v00.1203
HMC340LP5
GaAs MMIC SMT DOUBLE-BALANCED
DUAL MIXER,1.7 - 4.5 GHz
12
Harmonics of LO
LO Freq. (GHz)
nLO Spur at RF Port
1 23
1.5 46 33 66
2.0 41 28 53
2.5 46 29 47
3.0 55 36 57
3.5 50 44 57
4.0 43 48 57
4.5 37 54 64
5.0 33 53 69
LO = +13 dBm
Values in dBc below input LO level measured at RF Port.
4
58
64
69
76
74
65
78
81
Outline Drawing
MxN Spurious Outputs
nLO
mRF
0
1
2
0 xx 8 22
1 15 0 47
2 75 68 75
3 76 76 77
4 76 77 76
RF = 3.5 GHz @ -10 dBm
LO = 3.6 GHz @ +13 dBm
All values in dBc below IF power level
3
22
42
69
73
76
4
39
39
71
77
76
Absolute Maximum Ratings
RF / IF Input
LO Drive
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 16.55 mW/°C above 85°C)
Thermal Resistance (RTH)
(junction to package base)
Storage Temperature
Operating Temperature
+13 dBm
+27 dBm
150°C
1.07 W
60.4 °C/W
-65 to +150 °C
-40 to +85 deg °C
12 - 164
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.25mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC340LP5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC340LP5 | GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER/ 1.7 - 4.5 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |