PDF HMC226 Data sheet ( Hoja de datos )

Número de pieza	HMC226
Descripción	GaAs MMIC +3V SOT26 TRANSMIT/RECEIVE SWITCH/ DC - 2.0 GHz
Fabricantes	Hittite Microwave Corporation
Logotipo
Hay una vista previa y un enlace de descarga de HMC226 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas
No Preview Available ! MICROWAVE CORPORATION v02.0502 HMC226 GaAs MMIC +3V SOT26 TRANSMIT/ RECEIVE SWITCH, DC - 2.0 GHz Typical Applications The HMC226 is ideal for: • 900 MHz ISM/Cellular • 1900 MHz PCS Functional Diagram 14 Features Low Insertion Loss: 0.6 dB Ultra Small Package: SOT26 High Input P1dB: +35 to +38 dBm High Input IP3: +55 to +61 dBm Positive Control: 0/+3V to 0/+8V General Description The HMC226 is a low-cost SPDT switch in a 6-lead SOT26 package for use in transmit-receive applica- tions which require very low distortion at high signal power levels. The device can control signals from DC to 2.0 GHz and is especially suited for 450 MHz, 900 MHz, and 1.8 - 2.0 GHz applications with 0.5 to 0.8 dB loss. The design provides exceptional P1dB and intermodulation performance; a +35 dBm 1dB compression point and +55 dBm third order inter- cept at +3 volt bias. RF1 and RF2 are reﬂective opens when “Off”. On-chip circuitry allows single positive supply operation at very low DC current with control inputs compatible with CMOS and most TTL logic families. Electrical Speciﬁcations, TA = +25° C, Vctl = 0/+3 Vdc, 50 Ohm System Parameter Frequency Min. Typ. Insertion Loss DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz 0.5 0.6 0.8 Isolation DC - 0.5 GHz 23 26 DC - 1.0 GHz 17 20 DC - 2.0 GHz 12 15 Return Loss DC - 0.5 GHz 23 27 DC - 1.0 GHz 21 25 DC - 2.0 GHz 14 18 Input Power for 1 dB Compression 0/5V Control 0/3V Control 0.3 - 2.0 GHz 34 31 38 35 Input Third Order Intercept (Two-Tone Input Power = +26 dBm Each Tone) 0/5V Control 0/3V Control 0.3 - 2.0 GHz 61 55 Switching Characteristics DC - 2.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 70 140 Max. 0.8 0.9 1.2 Units dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm ns ns 14 - 76 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 1 page MICROWAVE CORPORATION v02.0502 HMC226 GaAs MMIC +3V SOT26 TRANSMIT/ RECEIVE SWITCH, DC - 2.0 GHz Typical Application Circuit 14 Notes: 1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 8 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with V set to +10V. The switch will operate properly (but at lower RF power capability) at bias voltages down to +3V. 14 - 80 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 5 Page

Páginas	Total 6 Páginas
PDF Descargar	[ Datasheet HMC226.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
HMC220AMS8	GaAs MMIC SMT DOUBLEBALANCED MIXER	Hittite Microwave Corporation
HMC220AMS8E	GaAs MMIC SMT DOUBLEBALANCED MIXER	Hittite Microwave Corporation
HMC220MS8	GaAs MMIC SMT DOUBLEBALANCED MIXER/ 5 - 12 GHz	Hittite Microwave Corporation
HMC221	GaAs MMIC SOT26 SPDT SWITCH/ DC - 3 GHz	Hittite Microwave Corporation

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar