HMC204 Datasheet PDF - Hittite Microwave Corporation
| Part Number | HMC204 | |
| Description | GaAs MMIC PASSIVE FREQUENCY DOUBLER/ 4 - 8 GHz INPUT | |
| Manufacturers | Hittite Microwave Corporation | |
| Logo |  |
|
|
There is a preview and HMC204 download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
MICROWAVE CORPORATION
v03.0304
HMC204
GaAs MMIC PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Typical Applications
The HMC204 is suitable for:
• Wireless Local Loop
• LMDS, VSAT, and Pt to Pt Radios
• Test Equipment
4 Functional Diagram
Features
Conversion Loss: 17 dB
Fo, 3Fo, 4Fo Isolation: 38 dB
Passive: No Bias Required
General Description
The HMC204 is a passive miniature frequency dou-
bler in a MMIC die. Suppression of undesired funda-
mental and higher order harmonics is 38 dB typical
with respect to input signal level. The doubler uti-
lizes the same GaAs Schottky diode/balun technol-
ogy found in Hittite MMIC mixers. It features small
size, no DC bias, and no measurable additive phase
noise onto the multiplied signal.
Electrical Specifications, T = +25° C, As a Function of Drive Level
A
Input = +10 dBm
Input = +12 dBm
Input = +15 dBm
Parameter
Min.
Typ. Max. Min.
Typ.
Max.
Min.
Typ. Max.
Frequency Range, Input
5.5 - 7.5
5.0 - 8.0
4.0 - 8.0
Frequency Range, Output
11.0 - 15.0
10.0 - 16.0
8.0 - 16.0
Conversion Loss
17 20
17 20
18 21
FO Isolation
(with respect to input level)
41 45
3FO Isolation
(with respect to input level)
42 46
4FO Isolation
(with respect to input level)
35 38
Units
GHz
GHz
dB
dB
dB
dB
4 - 10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
|
| |
 
v03.0304
MICROWAVE CORPORATION
HMC204
GaAs MMIC FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
Handling Precautions
Follow these precautions to avoid permanent damage.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid clean-
ing systems.
Static Sensitivity: Follow ESD precautions to protect against > ± 250V ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and
4 bias cables to minimize inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent
tweezers. The surface of the chip has fragile air bridges and should not be touched with vacuum collet,
tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically con-
ductive epoxy. The mounting surface should be clean and flat.
Epoxy Die Attach:
Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around
the perimeter of the chip once it is placed into position.
Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 1.0 diameter pure gold wire. Thermosonic wirebonding wiht a nominal stage tem-
perature of 150 °C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams
is recommended. Use the minimum level of ultrasonic energry to achieve reliable wirebonds. Wirebonds
should be started on the chip and terminated on the package. RF bonds should be as short as possible.
4 - 14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HMC204 electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HMC204.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HMC200 | The function is Staffa Dual Displacement Hydraulic Motor. Kawasaki |  |
| HMC2003 | The function is THREE-AXIS MAGNETIC SENSOR HYBRID. Honeywell |  |
| HMC203 | The function is GaAs MMIC DOUBLE-BALANCED MIXER/ 14 - 23 GHz. Hittite Microwave Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HMC2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||