|
|
Número de pieza | HMC182S14 | |
Descripción | GaAs MMIC SP4T NON-REFLECTIVE SWITCH/ DC - 2.0 GHz | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC182S14 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v02.0404 HMC182S14
MICROWAVE CORPORATION
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 2.0 GHz
14
Typical Applications
The HMC182S14 is ideal for:
• 800 - 1000 MHz Basestation
Features
Low Insertion Loss: 0.8dB
Integrated 2:4 Decoder
14 Lead SOIC Package
Functional Diagram
General Description
The HMC182S14 is a low-cost terminated SP4T
switch in a 14-lead SOIC package for use in
antenna diversity, switched filter banks, gain/
attenuation selection, and general channel multi-
plexing applications. The switch can control sig-
nals up to 2 GHz. A 2:4 decoder is integrated
on the switch, requiring only 2 control lines and
a negative bias to select each RF path. The
2:4 decoder replaces 4 to 8 control lines nor-
mally required by GaAs SP4T switches. The
HMC182S14 is a drop-in replacement for the
HMC165S14 in applications requiring low “off
state” VSWR. See positive bias/TTL SP4T
HMC241QS16.
Electrical Specifications,
TA = +25° C, For 0/-5V Control and Vee = -5V in a 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
Insertion Loss
DC - 1.0 GHz
DC - 2.0 GHz
0.7 1.1 dB
0.8 1.2 dB
Isolation
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
41 45
36 40
28 32
dB
dB
dB
Return Loss
“On State”
“On State”
“Off State”
“Off State”
DC - 1.0 GHz
DC - 2.0 GHz
DC - 1.0 GHz
DC - 2.0 GHz
21 25
16 20
17 21
13 17
dB
dB
dB
dB
Input Power for 1 dB Compression
50 MHz
0.5 - 2.0 GHz
22 dBm
24 dBm
Input Third Order Intercept
(Two-Tone Input Power = 7 dBm Each Tone).
50 MHz
0.5 - 1.0 GHz
0.5 - 2.0 GHz
25 30
41 45
37 41
dBm
dBm
dBm
Switching Characteristics
DC - 2.0 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
25 ns
50 ns
14 - 26
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page MICROWAVE CORPORATION
v02.0404
HMC182S14
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 2.0 GHz
Evaluation PCB
14
List of Material
Item
Description
J1 - J5
PC Mount SMA RF Connector
J6 - J9
DC Pin
C1 - C5
330 pF capacitor, 0402 Pkg.
C6 - C8
10,000 pF capacitor, 0603 Pkg.
U1 HMC182S14 SP4T Switch
PCB*
101656 Evaluation PCB
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads
should be connected directly to the ground plane
similar to that shown above. The evaluation circuit
board shown above is available from Hittite Micro-
wave Corporation upon request.
14 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC182S14.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC182S14 | GaAs MMIC SP4T NON-REFLECTIVE SWITCH/ DC - 2.0 GHz | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |