DataSheetWiki


HPT015ZEJJ-A fiches techniques PDF

Power-One - HPT SERIES - TRIPLE OUTPUT/ 15 WATT

Numéro de référence HPT015ZEJJ-A
Description HPT SERIES - TRIPLE OUTPUT/ 15 WATT
Fabricant Power-One 
Logo Power-One 





1 Page

No Preview Available !





HPT015ZEJJ-A fiche technique
(888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com
HPT SERIES - TRIPLE OUTPUT, 15 WATT
DESCRIPTION
HPT triple output DC/DC converters provide
15 Watts of output power in an industry standard
package. HPT’s feature excellent efficiency and
industry-leading power density. The HPT has open-
frame packaging to provide maximum useable power
with minimal thermal constraints. These units are
fully compatible with production board washing
processes.
FEATURES
• Triple Output 2” X 2”
• Open-Frame Packaging
• 2.5 Million Hours MTBF
• Short Circuit and
Overvoltage Protection
• 500V Isolation
• Input Undervoltage
Lockout
• 3-1 Wide Voltage
Input
• 100°C Baseplate
Operation
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
48 VDC Wide
Input
10 - 30 VDC
34 - 75 VDC
20 - 60 VDC
Output
Setpoint Accuracy
Auxiliary Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Ripple and Noise w/ 25 MHz BW, Pk-Pk / RMS
Current Limit Type
Current Limit Threshold Range, % of Iout Rated
Short Circuit Current Max.
OVP Trip Range
OVP Type
General
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF(Bellcore TR-NWT-000332)
Safety
Weight (approx.)
±1%
5%
±1% Vout
±1% Vout
10 % Iout Rated
25% Iout
1% Vout
250 µs
1% / 0.3% Vout
Hiccup
110 - 140%
200% Iout Nom.
110 - 140% Vout Nom.
Second Control Loop
200 kHz
500 VDC
500 VDC
500 VDC
0.02 ppm/°C
-40 to +100°C
-40 to +125°C
105 to 115°C
95%
2g
2.5 x 106 hrs
Consult Factory
0.85 oz
1
Notes
1 For negative logic, add suffix “N” to model number.
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or immersion
post wave-solder washing equipment.

PagesPages 3
Télécharger [ HPT015ZEJJ-A ]


Fiche technique recommandé

No Description détaillée Fabricant
HPT015ZEJJ-A HPT SERIES - TRIPLE OUTPUT/ 15 WATT Power-One
Power-One
HPT015ZEJJ-AS1 HPT SERIES - TRIPLE OUTPUT/ 15 WATT Power-One
Power-One

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche