DataSheetWiki


HMU17883 fiches techniques PDF

Intersil Corporation - 16 x 16-Bit CMOS Parallel Multiplier

Numéro de référence HMU17883
Description 16 x 16-Bit CMOS Parallel Multiplier
Fabricant Intersil Corporation 
Logo Intersil Corporation 





1 Page

No Preview Available !





HMU17883 fiche technique
HMU17/883
October 1997
16 x 16-Bit CMOS Parallel Multiplier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• 16 x 16-Bit Parallel Multiplier with Full 32-Bit Product
• High-Speed (45ns) Clocked Multiply Time
• Low Power CMOS Operation
- ICCSB = 500µA Maximum
- ICCOP = 7.0mA Maximum at 1MHz
• HMU17/883 is Compatible with the AM29517, LMU17,
IDT7217, and the CY7C517
• Supports Two’s Complement, Unsigned Magnitude
and Mixed Mode Multiplication
• TTL Compatible Inputs/Outputs
- Three-State Output
Ordering Information
TEMP.
PART NUMBER RANGE (oC)
PACKAGE
HMU17GM-45/883 -55 to 125 68 Ld PGA
HMU17GM-60/883 -55 to 125 68 Ld PGA
PKG.
NO.
The HMU17/883 is a high speed, low power CMOS 16 x 16-bit
parallel multiplier ideal for fast, real time digital signal processing
applications. The 16-bit X and Y operands may be independently
specified as either two’s complement or unsigned magnitude for-
mat, thereby allowing mixed mode multiplication operations.
Additional inputs are provided to accommodate format adjust-
ment and rounding of the 32-bit product. The Format Adjust con-
trol allows the user the option of selecting a 31-bit product with
the sign bit replicated LSP. The Round control is provided to
accommodate rounding of the most significant portion of the
result. This is accomplished by adding one to the most signifi-
cant bit of the LSP.
Two 16-bit output registers (MSP and LSP) are provided to hold
the most and least significant portions of the result, respectively.
These registers may be made transparent for asynchronous
operation through the use of the Feedthrough Control (FT). The
two halves of the product may be routed to a single 16-bit three-
state output port via the output multiplexer control, and in addi-
tion, the LSP is connected to the Y-input port through a separate
three-state buffer.
The HMU17/883 utilizes a single clock signal (CLK) along with
three register enables (ENX, ENY, and ENP) to latch the input
operands and the output product registers. The ENX and ENY
inputs enable the X and Y input registers, while ENP enables both
the LSP and MSP output registers. This configuration facilitates
the use of the HMU17/883 for micro-programmed systems.
All outputs of the HMU17/883 also offer three-state control for
multiplexing onto multiuse system busses.
Functional Block Diagram
X0-15 TCX
REGISTER
CLK
ENX
ENY
FA
FT
ENP
MSPSEL
OEP
RND
TCY Y0-15/P0-15
REGISTER
REGISTER
OEL
MULTIPLIER ARRAY
FORMAT ADJUST
MSP
LSP
REGISTER REGISTER
MULTIPLEXER
P16-31/P0-15
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
3-36
File Number 2805.2

PagesPages 6
Télécharger [ HMU17883 ]


Fiche technique recommandé

No Description détaillée Fabricant
HMU17883 16 x 16-Bit CMOS Parallel Multiplier Intersil Corporation
Intersil Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche