|
|
Número de pieza | HMC438MS8G | |
Descripción | SMT GaAs HBT MMIC DIVIDE-BY-5/ DC - 7.0 GHz | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC438MS8G (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v01.1002
MICROWAVE CORPORATION
10
Typical Applications
Prescaler for DC to C Band PLL Applications:
• UNII, Pt. - Pt. & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
• Cellular / 3G Infrastructure
Functional Diagram
HMC438MS8G
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Features
SSB Phase Noise: -153 dBc/Hz @100KHz
Wide Bandwidth
Output Power: -1 dBm
Single DC Supply: +5V @ 80 mA
MS8G SMT Package
General Description
The HMC438MS8G is a low noise Divide-by-5 Static
Divider utilizing InGaP GaAs HBT technology in a
low cost 8 lead surface mount plastic package. This
device operates from DC (with a square wave input)
to 7.0 GHz input frequency from a single +5.0V DC
supply. The low additive SSB phase noise of -153
dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Min.
Typ.
Max.
Units
Maximum Input Frequency
7.0 7.5
GHz
Minimum Input Frequency
Sine Wave Input [1]
0.1 GHz
Input Power Range
Fin= 1 to 5 GHz
-12 -15 +12
dBm
Fin= 5 to 6 GHz
-12 -15 +10
dBm
Fin= 6 to 7 GHz
-10 -15 +5
dBm
Output Power
-4 -1
dBm
Reverse Leakage
Both RF Outputs Terminated
-50 dBm
SSB Phase Noise (100 kHz offset)
Pin= 0 dBm, Fin= 6 GHz
-153
dBc/Hz
Output Transition Time
Pin= 0 dBm, Fout= 882 MHz
100 ps
Supply Current (Icc)
80 mA
1. Divider will operate down to DC for square-wave input signal.
10 - 96
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page v01.1002
MICROWAVE CORPORATION
Evaluation PCB
10
HMC438MS8G
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
List of Materials
Item
Description
J1 - J3
J4, J5
PC Mount SMA RF Connector
DC Pin
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5 10,000 pF Capacitor, 0603 Pkg.
C6 4.7 µF Tantalum Capacitor
U1 HMC438MS8G Divide-by-5
PCB*
105697 Eval Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
and backside ground slug should be connected directly
to the ground plane similar to that shown. A sufficient
number of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This evalu-
ation board is designed for single ended input testing. J2
and J3 provide differential output signals.
10 - 100
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC438MS8G.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC438MS8G | SMT GaAs HBT MMIC DIVIDE-BY-5/ DC - 7.0 GHz | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |