|
|
PDF HMC411MS8G Data sheet ( Hoja de datos )
| Número de pieza | HMC411MS8G | |
| Descripción | GaAs MMIC SINGLE-BALANCED MIXER/ 10.0 - 15.0 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC411MS8G (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.1101
MICROWAVE CORPORATION
HMC411MS8G
GaAs MMIC SINGLE-BALANCED
MIXER, 10.0 - 15.0 GHz
Typical Applications
The HMC411MS8G is ideal for:
• Long Haul Radio Platforms
• Microwave Radio
• VSAT
12
Functional Diagram
Features
Conversion Loss: 9.0 dB
LO/RF Isolation: 27 dB
LO/IF Isolation: 30 dB
Input IP3: +16 dBm
No External Components
MSOP8G SMT Package
General Description
The HMC411MS8G is a passive single balanced
mixer that operates between 10 GHz and 15 GHz.
The HMC411MS8G operates with LO drive levels
between +9 dBm and +15 dBm, and provides 9
dB conversion loss across the entire specified
frequency band. This mixer requires no external
components or bias.
Electrical Specifications, T = +25° C
A
Parameter
IF = 1.45 GHz
LO = +13 dBm
Min. Typ.
Frequency Range, RF & LO
10.0 - 15.0
Frequency Range, IF
DC - 3
Conversion Loss
9
Noise Figure (SSB)
9
LO to RF Isolation
20 27
LO to IF Isolation
20 30
RF to IF Isolation
8 15 - 20
IP3 (Input)
11 16
1 dB Compression (Input)
59
* Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz.
Max.
12
12
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
12 - 230
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
1 page  
v00.1101
MICROWAVE CORPORATION
HMC411MS8G
GaAs MMIC SINGLE-BALANCED
MIXER, 10.0 - 15.0 GHz
Pin Descriptions
Pin Number
Funciton
Description
Interface Schematic
1, 8
GND
Pins and exposed ground slug must connect to RF ground.
12
2
LO Port
This pin is aC coupled and matched to 50 Ohm from
10.0 - 15.0 GHz
3, 4, 6
5
N/C Not Connected
IF Port
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the neces-
sary IF frequency range. For operation to DC, this pin must not
source/sink more than 2 mA of current or die non-function and
possible die failure will result.
7
RF Port
This pin is AC coupled and matched to 50 Ohm from
10.0 - 15.0 GHz
12 - 234
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC411MS8G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC411MS8G | GaAs MMIC SINGLE-BALANCED MIXER/ 10.0 - 15.0 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |