DataSheetWiki


ADG612 fiches techniques PDF

Analog Devices - 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches

Numéro de référence ADG612
Description 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADG612 fiche technique
a 1 pC Charge Injection, 100 pA Leakage,
CMOS ؎5 V/+5 V/+3 V Quad SPST Switches
ADG611/ADG612/ADG613
FEATURES
1 pC Charge Injection
؎2.7 V to ؎5.5 V Dual Supply
+2.7 V to +5.5 V Single Supply
Automotive Temperature Range –40؇C to +125؇C
100 pA Max @ 25؇C Leakage Currents
85 On-Resistance
Rail-to-Rail Switching Operation
Fast Switching Times
16-Lead TSSOP Packages
Typical Power Consumption (<0.1 W)
TTL/CMOS-Compatible Inputs
APPLICATIONS
Automatic Test Equipment
Data Acquisition Systems
Battery-Powered Systems
Communication Systems
Sample and Hold Systems
Audio Signal Routing
Relay Replacement
Avionics
FUNCTIONAL BLOCK DIAGRAMS
ADG611
S1
ADG612
S1
ADG613
S1
IN1 IN1 IN1
D1 D1 D1
S2 S2 S2
IN2 IN2 IN2
D2 D2 D2
S3 S3 S3
IN3 IN3 IN3
D3 D3 D3
S4 S4 S4
IN4 IN4 IN4
D4 D4 D4
SWITCHES SHOWN FOR A LOGIC “1” INPUT
GENERAL DESCRIPTION
The ADG611, ADG612, and ADG613 are monolithic CMOS
devices containing four independently selectable switches. These
switches offer ultralow charge injection of 1 pC over full input
signal range and typical leakage currents of 10 pA at 25°C.
They are fully specified for ± 5 V, +5 V, and +3 V supplies.
They contain four independent single-pole/single-throw (SPST)
switches. The ADG611 and ADG612 differ only in that the
digital control logic is inverted. The ADG611 switches are turned
on with a logic low on the appropriate control input, while a logic
high is required to turn on the switches of the ADG612. The
ADG613 contains two switches whose digital control logic is
similar to the ADG611, while the logic is inverted on the other
two switches.
Each switch conducts equally well in both directions when ON
and has an input signal range that extends to the supplies. The
ADG613 exhibits break-before-make switching action. The
ADG611/ADG612/ADG613 are available in small 16-lead
TSSOP packages.
PRODUCT HIGHLIGHTS
1. Ultralow Charge Injection (1 pC typically)
2. Dual ± 2.7 V to ± 5.5 V or Single +2.7 V to +5.5 V
Operation.
3. Automotive Temperature Range, –40°C to +125°C
4. Small 16-lead TSSOP package.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002

PagesPages 12
Télécharger [ ADG612 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADG611 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches Analog Devices
Analog Devices
ADG612 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches Analog Devices
Analog Devices
ADG613 1 pC Chanrge Injection/ 100 pA Leakage/ CMOS +-5 V/+5 V/+3 V Quad SPST Switches Analog Devices
Analog Devices
ADG619 CMOS +-5 V/ +5V 4 OHM SINGLE SPDT SWITCHES Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche