DataSheetWiki


ADG438F fiches techniques PDF

Analog Devices - High Performance 4/8 Channel Fault-Protected Analog Multiplexers

Numéro de référence ADG438F
Description High Performance 4/8 Channel Fault-Protected Analog Multiplexers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADG438F fiche technique
a
High Performance 4/8 Channel
Fault-Protected Analog Multiplexers
ADG438F/ADG439F*
FEATURES
Fast Switching Times
tON 250 ns max
tOFF 150 ns max
Fault and Overvoltage Protection (–40 V, +55 V)
All Switches OFF with Power Supply OFF
Analog Output of ON Channel Clamped Within Power
Supplies If an Overvoltage Occurs
Latch-Up Proof Construction
Break Before Make Construction
TTL and CMOS Compatible Inputs
APPLICATIONS
Data Acquisition Systems
Industrial and Process Control Systems
Avionics Test Equipment
Signal Routing Between Systems
High Reliability Control Systems
FUNCTIONAL BLOCK DIAGRAMS
ADG438F
S1
D
S8
1 OF 8
DECODER
ADG439F
S1A
S4A
DA
S1B
S4B
1 OF 4
DECODER
DB
A0 A1 A2 EN
A0 A1 EN
GENERAL DESCRIPTION
The ADG438F/ADG439F are CMOS analog multiplexers, the
ADG438F comprising 8 single channels and the ADG439F
comprising four differential channels. These multiplexers pro-
vide fault protection. Using a series n-channel, p-channel, n-
channel MOSFET structure, both device and signal source
protection is provided in the event of an overvoltage or power
loss. The multiplexer can withstand continuous overvoltage
inputs from –40 V to +55 V. During fault conditions, the multi-
plexer input (or output) appears as an open circuit and only a
few nanoamperes of leakage current will flow. This protects not
only the multiplexer and the circuitry driven by the multiplexer,
but also protects the sensors or signal sources which drive the
multiplexer.
The ADG438F switches one of eight inputs to a common out-
put as determined by the 3-bit binary address lines A0, A1 and
A2. The ADG439F switches one of four differential inputs to a
common differential output as determined by the 2-bit binary
address lines A0 and A1. An EN input on each device is used to
enable or disable the device. When disabled, all channels are
switched OFF.
PRODUCT HIGHLIGHTS
1. Fault Protection.
The ADG438F/ADG439F can withstand continuous volt-
age inputs up to –40 V or +55 V. When a fault occurs due
to the power supplies being turned off, all the channels
are turned off and only a leakage current of a few nano-
amperes flows.
2. ON channel turns OFF while fault exists.
3. Low RON.
4. Fast Switching Times.
5. Break-Before-Make Switching.
Switches are guaranteed break-before-make so that input
signals are protected against momentary shorting.
6. Trench Isolation Eliminates Latch-up.
A dielectric trench separates the p- and n-channel MOSFETs
thereby preventing latch-up.
7. Improved OFF Isolation.
Trench isolation enhances the channel-to-channel isolation
of the ADG438F/ADG439F.
*Patent Pending.
REV. D
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2000

PagesPages 8
Télécharger [ ADG438F ]


Fiche technique recommandé

No Description détaillée Fabricant
ADG438 High Performance 4/8 Channel Fault-Protected Analog Multiplexers Analog Devices
Analog Devices
ADG438F High Performance 4/8 Channel Fault-Protected Analog Multiplexers Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche