DataSheetWiki


ADG407 fiches techniques PDF

Analog Devices - LC2MOS 8-/16-Channel High Performance Analog Multiplexers

Numéro de référence ADG407
Description LC2MOS 8-/16-Channel High Performance Analog Multiplexers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADG407 fiche technique
a
LC2MOS 8-/16-Channel
High Performance Analog Multiplexers
ADG406/ADG407/ADG426
FEATURES
44 V Supply Maximum Ratings
VSS to VDD Analog Signal Range
Low On Resistance (80 max)
Low Power
Fast Switching
tON < 160 ns
tOFF < 150 ns
Break Before Make Switching Action
Plug-In Upgrade for
DG506A/ADG506A, DG507A/ADG507A,
DG526/ADG526A
ADG406/ADG407 are Plug-In Replacements for
DG406/DG407
APPLICATIONS
Audio and Video Routing
Automatic Test Equipment
Data Acquisition Systems
Battery Powered Systems
Sample Hold Systems
Communication Systems
Avionics
FUNCTIONAL BLOCK DIAGRAMS
ADG406
ADG407
S1 S1A
DA
S8A
D
S1B
DB
S16 S8B
1 OF 16
DECODER
1 OF 8
DECODER
A0 A1 A2 A3 EN
S1
A0 A1 A2 EN
ADG426
D
S16
DECODER/
WR LATCHES
A0 A1 A2 A3 EN RS
GENERAL DESCRIPTION
The ADG406, ADG407 and ADG426 are monolithic CMOS
analog multiplexers. The ADG406 and ADG426 switch one of
sixteen inputs to a common output as determined by the 4-bit
binary address lines A0, A1, A2 and A3. The ADG426 has on-
chip address and control latches that facilitate microprocessor
interfacing. The ADG407 switches one of eight differential
inputs to a common differential output as determined by the 3-
bit binary address lines A0, A1 and A2. An EN input on all
devices is used to enable or disable the device. When disabled,
all channels are switched OFF.
The ADG406/ADG407/ADG426 are designed on an enhanced
LC2MOS process that provides low power dissipation yet gives
high switching speed and low on resistance. These features
make the parts suitable for high speed data acquisition systems
and audio signal switching. Low power dissipation makes the
parts suitable for battery powered systems. Each channel
conducts equally well in both directions when ON and has an
input signal range which extends to the supplies. In the OFF
condition, signal levels up to the supplies are blocked. All
channels exhibit break before make switching action preventing
momentary shorting when switching channels. Inherent in the
design is low charge injection for minimum transients when
switching the digital inputs.
PRODUCT HIGHLIGHTS
1. Extended Signal Range
The ADG406/ADG407/ADG426 are fabricated on an
enhanced LC2MOS process giving an increased signal range
which extends to the supply rails
2. Low Power Dissipation
3. Low R
ON
4. Single/Dual Supply Operation
5. Single Supply Operation
For applications where the analog signal is unipolar, the
ADG406/ADG407/ADG426 can be operated from a single
rail power supply. The parts are fully specified with a single
+12 V power supply and will remain functional with single
supplies as low as +5 V.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood. MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703

PagesPages 12
Télécharger [ ADG407 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADG406 LC2MOS 8-/16-Channel High Performance Analog Multiplexers Analog Devices
Analog Devices
ADG407 LC2MOS 8-/16-Channel High Performance Analog Multiplexers Analog Devices
Analog Devices
ADG408 High Performance Analog Multiplexers Analog Devices
Analog Devices
ADG409 High Performance Analog Multiplexers Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche