DataSheetWiki


A3952SLB fiches techniques PDF

Allegro MicroSystems - FULL-BRIDGE PWM MOTOR DRIVER

Numéro de référence A3952SLB
Description FULL-BRIDGE PWM MOTOR DRIVER
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A3952SLB fiche technique
3952
FULL-BRIDGE PWM MOTOR DRIVER
A3952SB
BRAKE 1
REF 2
VBB
RC 3
GROUND 4
GROUND 5
LOGIC
SUPPLY
6
VCC
PHASE 7
ENABLE 8
LOGIC
VBB
16
LOAD
SUPPLY
15 OUTB
14 MODE
13 GROUND
12 GROUND
11 SENSE
10 OUTA
LOAD
9 SUPPLY
Dwg. PP-056
Note that the A3952SB (DIP) and the A3952SLB
(SOIC) are electrically identical and share a
common terminal number assignment.
ABSOLUTE MAXIMUM RATINGS
Load Supply Voltage, VBB .................. 50 V
Output Current, IOUT
(tw 20 µs) .................................. ±3.5 A
(Continuous) ............................... ±2.0 A
Logic Supply Voltage, VCC ................. 7.0 V
Logic Input Voltage Range,
VIN ....................... -0.3 V to VCC + 0.3 V
Sense Voltage, VSENSE ...................... 1.5 V
Reference Voltage, VREF .................... 15 V
Package Power Dissipation,
PD ....................................... See Graph
Operating Temperature Range,
TA ............................... –20°C to +85°C
Junction Temperature, TJ ............. +150°C*
Storage Temperature Range,
TS ............................. –55°C to +150°C
Output current rating may be limited by duty cycle,
ambient temperature, heat sinking and/or forced
cooling. Under any set of conditions, do not
exceed the specified current rating or a junction
temperature of +150°C.
* Fault conditions that produce excessive junction
temperature will activate device thermal shutdown
circuitry. These conditions can be tolerated but
should be avoided.
Designed for bidirectional pulse-width modulated current control of
inductive loads, the A3952S– is capable of continuous output currents
to ±2 A and operating voltages to 50 V. Internal fixed off-time PWM
current-control circuitry can be used to regulate the maximum load
current to a desired value. The peak load current limit is set by the
user’s selection of an input reference voltage and external sensing
resistor. The fixed OFF-time pulse duration is set by a user-selected
external RC timing network. Internal circuit protection includes thermal
shutdown with hysteresis, transient suppression diodes, and crossover-
current protection. Special power-up sequencing is not required.
With the ENABLE input held low, the PHASE input controls load
current polarity by selecting the appropriate source and sink driver pair.
The MODE input determines whether the PWM current-control circuitry
operates in a slow current-decay mode (only the selected sink driver
switching) or in a fast current-decay mode (selected source and sink
switching). A user-selectable blanking window prevents false triggering
of the PWM current control circuitry. With the ENABLE input held high,
all output drivers are disabled. A sleep mode is provided to reduce
power consumption when inactive.
When a logic low is applied to the BRAKE input, the braking
function is enabled. This overrides ENABLE and PHASE to turn OFF
both source drivers and turn ON both sink drivers. The brake function
can be safely used to dynamically brake brush dc motors.
The A3952S– is supplied in a choice of four power packages. In all
package styles, the batwing/power tab is at ground potential and needs
no isolation. These devices are also available for operation from -40°C
to +125°C. To order, change the suffix from 'S–' to 'K–'.
FEATURES
s ±2 A Continuous Output Current Rating
s 50 V Output Voltage Rating
s Internal PWM Current Control
s Fast and Slow Current-Decay Modes
s Sleep (Low Current Consumption) Mode
s Internal Transient Suppression Diodes
s Under-Voltage Lockout
s Internal Thermal Shutdown Circuitry
s Crossover-Current Protection
Always order by complete part number:
Part Number
A3952SB
A3952SEB
A3952SLB
A3952SW
Package
16-Pin DIP
28-Lead PLCC
16-Lead SOIC
12-Pin Power-Tab SIP
RθJA
43°C/W
42°C/W
67°C/W
36°C/W
RθJT
6.0°C/W
6.0°C/W
6.0°C/W
2.0°C/W

PagesPages 16
Télécharger [ A3952SLB ]


Fiche technique recommandé

No Description détaillée Fabricant
A3952SLB FULL-BRIDGE PWM MOTOR DRIVER Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche