DataSheetWiki


A3518LUA fiches techniques PDF

Allegro MicroSystems - RATIOMETRIC/ LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION

Numéro de référence A3518LUA
Description RATIOMETRIC/ LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A3518LUA fiche technique
3517 AND
3518
RATIOMETRIC, LINEAR HALL-EFFECT SENSORS
FOR HIGH-TEMPERATURE OPERATION
The A3517xUA and A3518xUA are sensitive, temperature-stable linear
Hall-effect sensors with greatly improved offset characteristics. Ratiometric,
linear Hall-effect sensors provide a voltage output that is proportional to the
applied magnetic field and have a quiescent output voltage that is approxi-
mately 50% of the supply voltage. These magnetic sensors are ideal for use in
linear and rotary position sensing systems in the harsh environments of
automotive and industrial applications over extended temperatures to -40°C
and +150°C. The A3517xUA features an output sensitivity of 5 mV/G while
the A3518xUA has an output sensitivity of 2.5 mV/G. See the Magnetic
V
CC
Characteristics table for complete, individual device parametrics.
12
3
Each BiCMOS monolithic circuit integrates a Hall element, improved
temperature-compensating circuitry to reduce the intrinsic sensitivity drift of
the Hall element, a small-signal high-gain amplifier, and a rail-to-rail low-
impedance output stage.
Dwg. PH-006
Pinning is shown viewed from branded side.
A proprietary dynamic offset cancelation technique, with an internal high-
frequency clock, reduces the residual offset voltage, which is normally caused
by device overmolding, temperature dependancies, and thermal stress. This
technique produces devices that have an extremely stable quiescent output
voltage, are immune to mechanical stress, and have precise recoverability after
temperature cycling. Many problems normally associated with low-level
analog signals are minimized by having the Hall element and amplifier in a
single chip. Output precision is obtained by internal gain and offset trim
adjustments during the manufacturing process.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC ......................... 8.0 V
Output Voltage, VO ........................... 8.0 V
Output Sink Current, IO .................. 10 mA
Magnetic Flux Density, B ......... Unlimited
Package Power Dissipation,
PD .................................... See Graph
Operating Temperature Range*, TA
Suffix S– .................... -20°C to +85°C
Suffix L– .................... -40°C to +150°C
Storage Temperature Range,
TS ............................. -65°C to +170°C
* Infrequent excursions permitted; see
Applications Information.
These reduced-cost devices are supplied in a 3-pin ultra-mini-SIP “UA”
package only.
FEATURES
I Temperature-Stable Quiescent Output Voltage
I Precise Recoverability After Temperature Cycling
I Output Voltage Proportional to Applied Magnetic Field
I Ratiometric Rail-to-Rail Output
I Improved Sensitivity
I 4.5 V to 5.5 V Operation
I Immune to Mechanical Stress
I Small Package Size
I Solid-State Reliability
Always order by complete part number, e.g., A3517SUA .

PagesPages 12
Télécharger [ A3518LUA ]


Fiche technique recommandé

No Description détaillée Fabricant
A3518LUA RATIOMETRIC/ LINEAR HALL-EFFECT SENSORS FOR HIGH-TEMPERATURE OPERATION Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche