DataSheetWiki


A3209EUA-TL fiches techniques PDF

Allegro MicroSystems - MICROPOWER/ ULTRA-SENSITIVE HALL-EFFECT SWITCHES

Numéro de référence A3209EUA-TL
Description MICROPOWER/ ULTRA-SENSITIVE HALL-EFFECT SWITCHES
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A3209EUA-TL fiche technique
3209 AND
3210
Package Suffix ‘LH’ Pinning
3
V
DD
1
2
Dwg. PH-016-1
Pinning is shown viewed from branded side.
ABSOLUTE MAXIMUM RATINGS
at TA = +25°C
Supply Voltage, VDD ............................. 5 V
Magnetic Flux Density, B .......... Unlimited
Output Off Voltage, VOUT ..................... 5 V
Output Current, IOUT .......................... 1 mA
Junction Temperature, TJ ............... +170°C
Operating Temperature Range,
TA ............................... -40°C to +85°C
Storage Temperature Range,
TS .............................. -65°C to +170°C
Caution: These CMOS devices have input
static protection (Class 3) but are still
susceptible to damage if exposed to
extremely high static electrical charges.
MICROPOWER, ULTRA-SENSITIVE
HALL-EFFECT SWITCHES
The A3209Ex and A3210Ex integrated circuits are ultra-sensitive, pole
independent Hall-effect switches with a latched digital output. They are
especially suited for operation in battery-operated, hand-held equipment such as
cellular and cordless telephones, pagers, and palmtop computers. 2.5 volt to
3.5 volt operation and a unique clocking scheme to reduce the average operat-
ing power requirements – the A3209Ex to 400 µW, the A3210Ex to 25 µW!
Except for operating duty cycle and average operating current, the A3209Ex
and A3210Ex are identical.
Unlike other Hall-effect switches, either a north or south pole of sufficient
strength will turn the output on; in the absence of a magnetic field, the output is
off. The polarity independence and minimal power requirement allows these
devices to easily replace reed switches for superior reliability and ease of
manufacturing, while eliminating the requirement for signal conditioning.
Improved stability is made possible through chopper stabilization (dynamic
offset cancellation), which reduces the residual offset voltage normally caused
by device overmolding, temperature dependencies, and thermal stress.
These devices include on a single silicon chip a Hall-voltage generator,
small-signal amplifier, chopper stabilization, a latch, and a MOSFET output.
Advanced BiCMOS processing is used to take advantage of low-voltage and
low-power requirements, component matching, very low input-offset errors,
and small component geometries.
The A3209Ex and A3210Ex are rated for operation over a temperature
range of -40°C to +85°C. Two package styles provide a magnetically opti-
mized package for most applications. Suffix ‘LH’ is a miniature low-profile
surface-mount package while suffix ‘UA’ is a three-lead ultra-mini-SIP for
through-hole or surface mounting.
FEATURES
I Micropower Operation
I Operate With North or South Pole
I 2.5 V to 3.5 V Battery Operation
I Chopper Stabilized
Superior Temperature Stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
I ESD Protected to 5 kV
I Solid-State Reliability
I Small Size
I Easily Manufacturable With Magnet Pole Independence
Always order by complete part number: the prefix ‘A’ + the basic four-digit
part number + the suffix ‘E’ to indicate operating temperature range + a
suffix to indicate package style, e.g., A3210ELH .

PagesPages 12
Télécharger [ A3209EUA-TL ]


Fiche technique recommandé

No Description détaillée Fabricant
A3209EUA-TL MICROPOWER/ ULTRA-SENSITIVE HALL-EFFECT SWITCHES Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche