DataSheetWiki


A2918SWH fiches techniques PDF

Allegro MicroSystems - DUAL FULL-BRIDGE PWM MOTOR DRIVER

Numéro de référence A2918SWH
Description DUAL FULL-BRIDGE PWM MOTOR DRIVER
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





A2918SWH fiche technique
2918
DUAL FULL-BRIDGE
PWM MOTOR DRIVER
The A2918SWH and A2918SWV motor drivers are designed
OUT1A 1
OUT2A 2
E2 3
OUT2B 4
to drive both windings of a bipolar stepper motor or bidirectionally
control two dc motors. All bridges are capable of sustaining 45 V and
include internal pulse-width modulation (PWM) control of the output
current to 1.5 A.
LOAD SPLY 5
For PWM current control, the maximum output current is
SENSE2 6
ENABLE2 7
PHASE2 8
TRC2 9
CGROUND 10
U .LOGIC SPLY 11
YRC1 12
PHASE1 13
D LENABLE1 14
O NREFERENCE 15
nSENSE1 16
R O igOUT1B 17
P sE1 18
D CE deDwg.PP-051
E N wABSOLUTE MAXIMUM RATINGS
eat TJ +150°C
U E nMotor Supply Voltage, VBB . . . . . . . . . 45 V
IN R rOutput Current, IOUT (tw20 µs) . . ±1.75 A
T E fo(Continuous) . . . . . . . . . . . . . . ±1.5 A
Logic Supply Voltage, VCC . . . . . . . . . 7.0 V
N F BLogic Input Voltage Range,
E EVIN . . . . . . . . . . . . . . . -0.3 V to +7.0 V
O R 7Output Emitter Voltage, VE . . . . . . . . . 1.5 V
C 1Package Power Dissipation,
PD . . . . . . . . . . . . . . . . . . . . See Graph
IS R 9Operating Temperature Range,
2TA . . . . . . . . . . . . . . . . -20°C to +85°C
D O NStorage Temperature Range,
F DTS . . . . . . . . . . . . . . . -40°C to +150°C
Output current rating may be limited by duty cycle,
Uambient temperature, and heat sinking. Under
any set of conditions, do not exceed the specified
epeak current rating or a junction temperature of
Us+150°C.
determined by the user’s selection of a reference voltage and sensing
resistor. A PHASE input to each bridge determines load current
direction. Active low ENABLE inputs control the four drivers in
each bridge.
The bridges include both ground clamp and flyback diodes for
protection against inductive transients. Internally generated delays
prevent cross-over currents when switching current direction.
Special power-up sequencing is not required. Thermal protection
circuitry disables the outputs if the chip temperature exceeds safe
operating limits.
The A2918SWH/V are supplied in an 18-lead power-tab package
with staggered lead forming. The tab is internally insulated from the
device and requires no external isolation. The A2918SWH/V are
available for operation from -40°C to +85°C. To order, change the
suffix from 'S–' to 'E–'. These devices are also available on special
order for operation to +125°C.
FEATURES
I ±1.5 A Continuous Output Current
I 45 V Output Sustaining Voltage
I Internal PWM Current Control
I Low Output Saturation Voltage
I Internal Clamp Diodes
I Internal Thermal Shutdown Circuitry
I Similar to Dual PBL3718 or Dual PBL3770
Always order by complete part number:
Part Number Application
A2918SWH For Horizontal Mount
A2918SWV For Vertical Mount

PagesPages 8
Télécharger [ A2918SWH ]


Fiche technique recommandé

No Description détaillée Fabricant
A2918SWH DUAL FULL-BRIDGE PWM MOTOR DRIVER Allegro MicroSystems
Allegro MicroSystems
A2918SWV DUAL FULL-BRIDGE PWM MOTOR DRIVER Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche