DataSheetWiki


150D566X9010R2 fiches techniques PDF

Vishay Siliconix - Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead

Numéro de référence 150D566X9010R2
Description Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead
Fabricant Vishay Siliconix 
Logo Vishay Siliconix 





1 Page

No Preview Available !





150D566X9010R2 fiche technique
150D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors
Hermetically-Sealed, Axial-Lead
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %,
± 10 % standard. ± 5 % available as special.
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
FEATURES
Terminations: Tin/lead (SnPb), 100 % Tin
(RoHS compliant)
Available
These high performance, hermetically-sealed
TANTALEX® capacitors have set the standard for
solid-electrolyte tantalum capacitors for more
than three decades.
RoHS*
COMPLIANT
High capacitance, low DCL, low dissipation factor and
exceptional operating stability.
Performance and reliability have been proven in
commercial, industrial and military applications.
Available in four case codes and capacitors and are
supplied with plastic-film insulation.
Terminals are solid, tinned nickel wire leads.
The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h or derated DC voltage applied
at + 125 °C for 1000 h
Following the life test:
1. DCLhttp://www.DataSheet4U.net/ shall not exceed 125 % of the initial requirement
2. Dissipation Factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 5 %
DIMENSIONS in inches [millimeters]
1.500 ± 0.250
[38.10 ± 6.35]
1.500 ± 0.250
[38.10 ± 6.35]
L
-+
D
DIA.
CASE CODE
A
B
R
S
SOLID TINNED
NICKEL LEADS
WITH INSULATING SLEEVE (1)
DL
0.135 ± 0.016
[3.43 ± 0.41]
0.185 ± 0.016
[4.70 ± 0.41]
0.289 ± 0.016
[7.34 ± 0.41]
0.351 ± 0.016
[8.92 ± 0.41]
0.286 ± 0.031
[7.26 ± 0.79]
0.474 ± 0.031
[12.04 ± 0.79]
0.686 ± 0.031
[17.42 ± 0.79]
0.786 ± 0.031
[19.96 ± 0.79]
J
MAX..
0.047 [1.19] MAX.
0.125 [3.18] MAX.
J (MAXIMUM)
0.422
[10.720]
0.610
[15.490]
0.822
[20.880]
0.922
[23.420]
AWG
NO.
24
24
22
22
Note:
(1) When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body
* Pb containing terminations are not RoHs compliant, exemptions may apply
LEAD SIZE
NOMINAL
DIAMETER
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
www.vishay.com
18
For technical questions, contact: [email protected]
Document Number: 40015
Revision: 16-Jan-08
datasheet pdf - http://www.DataSheet4U.net/

PagesPages 10
Télécharger [ 150D566X9010R2 ]


Fiche technique recommandé

No Description détaillée Fabricant
150D566X9010R2 Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead Vishay Siliconix
Vishay Siliconix

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche