DataSheetWiki


ADM560 fiches techniques PDF

Analog Devices - RS-232 Notebook PC Serial Port Drivers/Receivers

Numéro de référence ADM560
Description RS-232 Notebook PC Serial Port Drivers/Receivers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADM560 fiche technique
Ultralow Power +3.3 V, RS-232
Notebook PC Serial Port Drivers/Receivers
ADM560/ADM561
FEATURES
RS-232 compatible
Operates with 3 V or 5 V logic
Ultralow power CMOS: 1.3 mA operation
Low power shutdown: 0.2 μA
Suitable for serial port mice
116 kbps data rate
1 μF charge pump capacitors
Single +3 V to +3.6 V power supply
Two receivers active in shutdown (ADM560)
APPLICATIONS
Notebook computers
Peripherals
Modems
Printers
Battery-operated equipment
GENERAL DESCRIPTION
The ADM560/ADM561 are four driver/five receiver interface
devices designed to meet the EIA-232 standard and operate with
a single +3.3 V power supply. The devices feature an on-board
dc-to-dc converter, eliminating the need for dual ±5 V power
supplies. This dc-to-dc converter contains a voltage doubler
and voltage inverter, both of which internally generate ±6.6 V
from the input +3.3 V power supply.
The ADM560 and the ADM561 consume only 5 mW making
them ideally suited for battery and other power-sensitive appli-
cations. A shutdown facility is also provided to reduce the power
to 0.66 μW.
The ADM560 contains active low shutdown and an active high
receiver enable signal. In shutdown mode, two receivers remain
active, thereby allowing monitoring of peripheral devices. This
feature allows the device to be shut down until a peripheral
FUNCTIONAL BLOCK DIAGRAM
+3.3V INPUT
1µF +
10V
1µF +
10V
T1IN
12 C1+ +3.3V TO +6.6V
VOLTAGE
14 C1– DOUBLER
VCC 11
V+ 13
15 C2+ +6.6V TO –6.6V
VOLTAGE
16 C2– INVERTER
V– 17
7 T1
2
C3
1µF
6.3V
C4
1µF
10V
T1OUT
0.1µF
CMOS
INPUTS
T2IN
T3IN
6
20
T2
T3
3 T2OUT
EIA/TIA-232
OUTPUTS
1 T3OUT
T4IN
R1OUT
21
8
T4
R1
28 T4OUT
9 R1IN
R2OUT
CMOS
OUTPUTS
R3OUT
R4OUT
5
26
22
R2 4 R2IN
R3
27
R3IN
EIA/TIA-232
INPUTS
R4 23 R4IN
R5OUT
EN (ADM560)
EN (ADM561)
19
24
R5 18
GND
ADM560/
ADM561
25
10
R5IN
SHDN (ADM560)
SHDN (ADM561)
Figure 1.
device begins communication. The active receivers alert the
processor, and then take the ADM560 out of shutdown mode.
The ADM561 features active high shutdown and an active
low receiver enable. In this device, all receivers are disabled
in shutdown.
The ADM560/ADM561 are fabricated using CMOS technology
for minimal power consumption. They feature a high level of
over-voltage protection and latch-up immunity. The receiver
inputs can withstand up to ±25 V levels. The transmitter inputs
can be driven from either 3 V or 5 V logic levels. This allows
operation in mixed 3 V/5 V power supply systems.
The ADM560/ADM561 are packaged in a 28-lead SOIC and
a 28-lead SSOP package.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.

PagesPages 12
Télécharger [ ADM560 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADM560 RS-232 Notebook PC Serial Port Drivers/Receivers Analog Devices
Analog Devices
ADM561 RS-232 Notebook PC Serial Port Drivers/Receivers Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche