DataSheetWiki


1N3050B fiches techniques PDF

Microsemi Corporation - Silicon 1 WATT Zener Diodes

Numéro de référence 1N3050B
Description Silicon 1 WATT Zener Diodes
Fabricant Microsemi Corporation 
Logo Microsemi Corporation 





1 Page

No Preview Available !





1N3050B fiche technique
SCOTTSDALE DIVISION
1N3016B thru 1N3051B
1 WATT METAL CASE ZENER DIODES
DESCRIPTION
This well established zener diode series for the 1N3016 thru 1N3051
JEDEC registration in the metal case DO-13 package provides a glass
hermetic seal for 6.8 to 200 volts. It is also well suited for high-reliability
applications where it is available in JAN, JANTX, and JANTXV military
qualifications. Lower voltages are also available in the 1N3821 thru
1N3830 series (3.3 V to 7.5 V) in the same package (see separate data
sheet). Microsemi also offers numerous other Zener diode products for a
variety of other packages including surface mount.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
DO-13
FEATURES
Zener Voltage Range: 6.8V to 200V
Hermetically sealed DO-13 metal package
Internally solder-bonded construction.
Also available in JAN, JANTX, JANTXV
qualifications per MIL-PRF19500/115 by adding the
JAN, JANTX, or JANTXV prefixes to part numbers
for desired level of screening, e.g. JANTX1N3016B,
JANTXV1N3051B, etc.
Surface mount also available with 1N3016BUR-1
thru 1N3051BUR-1 series on separate data sheet
APPLICATIONS / BENEFITS
Regulates voltage over a broad operating current
and temperature range
Wide selection from 6.8 to 200 V
Tight voltage tolerances available
Low reverse (leakage) currents
Nonsensitive to ESD
Hermetically sealed metal package
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
Operating Junction and Storage Temperatures:
-65oC to +175oC
THERMAL RESISTANCE: 50oC/W* junction to lead
at 0.375 inches (10 mm) from body or 110 oC/W
junction to ambient when leads are mounted on FR4
PC board with 4 mm2 copper pads (1 oz) and track
width 1 mm, length 25 mm
DC Power Dissipation*: 1.0 Watt at TL < +125oC 3/8”
(10 mm) from body or 1.0 Watts at TL < +65oC when
mounted on FR4 PC board as described for thermal
resistance above (also see Fig 1)
Forward Voltage @ 200 mA: 1.5 Volts.
Solder Temperatures: 260 o C for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
FINISH: All external surfaces are Tin-Lead (Pb/Sn)
plated and solderable per MIL-STD-750 method
2026
POLARITY: Cathode connected case.
WEIGHT: 1.4 grams.
Tape & Reel option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimensions on last page
* For further mounting reference, thermal resistance from junction to metal case may be reduced to < 20 oC/W
when mounting DO-13 metal case directly on heat sink.
Copyright 2003
11-03-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

PagesPages 4
Télécharger [ 1N3050B ]


Fiche technique recommandé

No Description détaillée Fabricant
1N3050 Diode Zener Single 200V 1% 1.5W 2-Pin DO-213AB New Jersey Semiconductor
New Jersey Semiconductor
1N3050A Silicon 1 WATT Zener Diodes Microsemi Corporation
Microsemi Corporation
1N3050A Diode Zener Single 180V 10% 1W 2-Pin DO-13 New Jersey Semiconductor
New Jersey Semiconductor
1N3050B Silicon 1 WATT Zener Diodes Microsemi Corporation
Microsemi Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche