DataSheetWiki


1F3 fiches techniques PDF

Pan Jit International Inc. - FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

Numéro de référence 1F3
Description FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)
Fabricant Pan Jit International Inc. 
Logo Pan Jit International Inc. 





1 Page

No Preview Available !





1F3 fiche technique
1F1 THRU 1F7
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l High current capability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l 1.0 ampere operation at TA=55 ¢J with no thermal runaway
l Fast switching for high efficiency
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage
R-1
MECHANICAL DATA
Case: Molded plastic, R-1
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A DC
Maximum Reverse Current TJ=25 ¢J
at Rated DC Blocking Voltage TJ=100 ¢J
Typical Junction capacitance (Note 1) CJ
Typical Thermal Resistance (Note 3) R £KJA
Maximum Reverse Recovery Time(Note 2)
Operating and Storage Temperature Range TJ,TSTG
1F1 1F2 1F3 1F4 1F5 1F6 1F7 UNITS
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
1.0 A
30 A
1.3 V
5.0 £g A
500 £g A
12 PF
67 ¢J /W
150 150 150 150 250 500 500
-55 to +150
ns
¢J
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A
3. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 0.22×0.22"(5.5×5.5mm) copper pads

PagesPages 2
Télécharger [ 1F3 ]


Fiche technique recommandé

No Description détaillée Fabricant
1F0626-10 Directional Couplers Anaren Microwave
Anaren Microwave
1F0626-20 Directional Couplers Anaren Microwave
Anaren Microwave
1F1 FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere) Pan Jit International Inc.
Pan Jit International Inc.
1F1 FAST RECOVERY RECTIFIER Rectron Semiconductor
Rectron Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche