DataSheetWiki


ADUC831 fiches techniques PDF

Analog Devices - MicroConverter/ 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU

Numéro de référence ADUC831
Description MicroConverter/ 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADUC831 fiche technique
MicroConverter®, 12-Bit ADCs and DACs
with Embedded 62 kBytes Flash MCU
ADuC831
FEATURES
ANALOG I/O
8-Channel, 247 kSPS 12-Bit ADC
DC Performance: ؎1 LSB INL
AC Performance: 71 dB SNR
DMA Controller for High Speed ADC-to-RAM Capture
2 12-Bit (Monotonic) Voltage Output DACs
Dual Output PWM/-DACs
On-Chip Temperature Sensor Function ؎3؇C
On-Chip Voltage Reference
Memory
62 kBytes On-Chip Flash/EE Program Memory
4 kBytes On-Chip Flash/EE Data Memory
Flash/EE, 100 Yr Retention, 100 kCycles Endurance
2304 Bytes On-Chip Data RAM
8051 Based Core
8051 Compatible Instruction Set (16 MHz Max)
12 Interrupt Sources, 2 Priority Levels
Dual Data Pointer
Extended 11-Bit Stack Pointer
On-Chip Peripherals
Time Interval Counter (TIC)
UART, I2C®, and SPI® Serial I/O
Watchdog Timer (WDT), Power Supply Monitor (PSM)
Power
Specified for 3 V and 5 V Operation
Normal, Idle, and Power-Down Modes
Power-Down: 20 A @ 3 V
APPLICATIONS
Optical Networking—Laser Power Control
Base Station Systems
Precision Instrumentation, Smart Sensors
Transient Capture Systems
DAS and Communications Systems
Pin compatible upgrade to existing ADuC812 systems
that require additional code or data memory. Runs
from 1 MHz–16 MHz to external crystal.
The ADuC832 is also available. Functionally is the same
as the ADuC831, except the ADuC832 runs from a 32 kHz
external crystal with on-chip PLL.
MicroConverter is a registered trademark and QuickStart is a trademark
of Analog Devices, Inc.
SPI is a registered trademark of Motorola, Inc.
I2C is a registered trademark of Philips Corporation.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
FUNCTIONAL BLOCK DIAGRAM
ADuC831
12-BIT
DAC
BUF
DAC
ADC0
ADC1
ADC5
ADC6
ADC7
MUX
T/H
TEMP
SENSOR
12-BIT ADC
HARDWARE
CALIBRATON
12-BIT
DAC
16-BIT
-DAC
16-BIT
-DAC
16-BIT
PWM
16-BIT
PWM
BUF
DAC
MUX
PWM0
PWM1
INTERNAL
BAND GAP
VREF
OSC
8051-BASED MCU WITH ADDITIONAL
PERIPHERALS
62 kBYTES FLASH/EE PROGRAM MEMORY
4 kBYTES FLASH/EE DATA MEMORY
2304 BYTES USER RAM
3 ؋ 16 BIT TIMERS POWER SUPPLY MON
1 ؋ REAL TIME CLOCK WATCHDOG TIMER
PARALLEL
PORTS
UART, I2C, AND SPI
SERIAL I/O
VREF
XTAL1 XTAL2
GENERAL DESCRIPTION
The ADuC831 is a fully integrated 247 kSPS data acquisition
system incorporating a high performance self-calibrating multi-
channel 12-bit ADC, dual 12-bit DACs, and programmable
8-bit MCU on a single chip.
The microcontroller core is an 8052, and therefore 8051-
instruction-set compatible with 12 core clock periods per machine
cycle. 62 kBytes of nonvolatile Flash/EE program memory are
provided on-chip. Four kBytes of nonvolatile Flash/EE data
memory, 256 bytes RAM and 2 kBytes of extended RAM are
also integrated on-chip.
The ADuC831 also incorporates additional analog functionality
with two 12-bit DACs, power supply monitor, and a band gap
reference. On-chip digital peripherals include two 16-bit Σ-
DACs, dual output 16-bit PWM, watchdog timer, time interval
counter, three timers/counters, Timer 3 for baud rate generation
and serial I/O ports (I2C, SPI and UART).
On-chip factory firmware supports in-circuit serial download and
debug modes (via UART), as well as single-pin emulation mode
via the EA pin. The ADuC831 is supported by QuickStart™ and
QuickStart Plus development systems featuring low cost software
and hardware development tools. A functional block diagram of
the ADuC831 is shown above with a more detailed block diagram
shown in Figure 1.
The part is specified for 3 V and 5 V operation over the extended
industrial temperature range, and is available in a 52-lead plastic
quad flatpack package and in a 56-lead chip scale package.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703 © Analog Devices, Inc., 2002. All rights reserved.

PagesPages 30
Télécharger [ ADUC831 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADUC831 MicroConverter/ 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU Analog Devices
Analog Devices
ADUC831BCP MicroConverter/ 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU Analog Devices
Analog Devices
ADUC831BS MicroConverter/ 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU Analog Devices
Analog Devices
ADuC832 MicroConverter 12-Bit ADCs and DACs Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche