|
|
Número de pieza | ADS828E | |
Descripción | 10-Bit/ 75MHz Sampling ANALOG-TO-DIGITAL CONVERTER | |
Fabricantes | Burr-Brown Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ADS828E (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! ®
ADS828
ADS828
For most current data sheet and other product
information, visit www.burr-brown.com
TM 10-Bit, 75MHz Sampling
ANALOG-TO-DIGITAL CONVERTER
FEATURES
q HIGH SNR: 58dB
q LOW POWER: 325mW
q +3V/+5V LOGIC I/O COMPATIBLE
q INTERNAL/EXTERNAL REFERENCE
OPTION
q SINGLE-ENDED OR DIFFERENTIAL
ANALOG INPUT
q PROGRAMMABLE INPUT RANGE:
1Vp-p or 2Vp-p
q LOW DNL: 0.4LSB
q SINGLE +5V SUPPLY OPERATION
q POWER DOWN: 20mW
q 28-LEAD SSOP PACKAGE
APPLICATIONS
q HDTV VIDEO DIGITIZING
q MEDICAL IMAGING
q COMMUNICATIONS
q TEST EQUIPMENT
+VS
ADS828
DESCRIPTION
The ADS828 is a pipeline, CMOS analog-to-digital converter
that operates from a single +5V power supply. This converter
provides excellent performance with a single-ended input and
can be operated with a differential input for added spurious
performance. This high performance converter includes a 10-bit
quantizer, high bandwidth track/hold, and a high accuracy
internal reference. It also allows for the user to disable the
internal reference and utilize external references. This external
reference option provides excellent gain and offset matching
when used in multi-channel applications or in applications
where full scale range adjustment is required.
The ADS828 employs digital error correction techniques to
provide excellent differential linearity for demanding imaging
applications. Its low distortion and high SNR give the extra
margin needed for medical imaging, communications, video,
and test instrumentation. The ADS828 offers power dissipa-
tion of 325mW and also provides a power-down mode, thus
reducing power dissipation to only 20mW.
The ADS828 is specified at a maximum sampling frequency of
75MHz and a single-ended input range of 1.5V to 3.5V. The
ADS828 is available in a 28-lead SSOP package and is pin
compatible with the 10-bit, 40MHz ADS822 and ADS825, and
the 10-bit, 60MHz ADS823 and ADS826.
CLK
VDRV
Timing
Circuitry
VIN IN
IN T/H
10-Bit
Pipelined
A/D Core
Error
Correction
Logic
3-State
Outputs
D0
•••
D9
CM Internal
Reference
Optional External
Reference
Int/Ext
PD OE
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
©1999 Burr-Brown Corporation
PDS-11549A
ADS828Printed in U.S.A. December, 1999
®
1 page TYPICAL PERFORMANCE CURVES
At TA = full specified temperature range, VS = +5V, single-ended input range = 1.5V to 3.5V, and sampling rate = 75MHz, external reference, VDRV +3V, unless otherwise noted.
SPECTRAL PERFORMANCE
(Differential Input, 2Vp-p, Internal Reference)
0
fIN = 10MHz
SFDR = 70dBFS
–20 SNR = 58.4dBFS
–40
–60
–80
–100
0
7.5 15 22.5 30 37.5
Frequency (MHz)
SPECTRAL PERFORMANCE
(Differential Input, 2Vp-p, Internal Reference)
0
fIN = 20MHz
SFDR = 70dBFS
–20 SNR = 57.6dBFS
–40
–60
–80
–100
0
7.5 15 22.5 30
Frequency (MHz)
37.5
0
–20
–40
–60
–80
–100
0
SPECTRAL PERFORMANCE
(Single-Ended, 2Vp-p, Internal Reference)
fIN = 10MHz
SFDR = 64.6dBFS
SNR = 55.5dBFS
7.5 15 22.5 30
Frequency (MHz)
37.5
SPECTRAL PERFORMANCE
(Single-Ended Input, 2Vp-p, Internal Reference)
0
fIN = 20MHz
SFDR = 62.3dBFS
–20 SNR = 55.2dBFS
–40
–60
–80
–100
0
7.5 15 22.5 30
Frequency (MHz)
37.5
0
–20
–40
–60
–80
–100
0
SPECTRAL PERFORMANCE
(Single-Ended, 1Vp-p, Internal Reference)
fIN = 10MHz
SFDR = 61.9dBFS
SNR = 51.2dBFS
7.5 15 22.5 30 37.5
Frequency (MHz)
0
–20
–40
–60
–80
–100
0
SPECTRAL PERFORMANCE
(Single-Ended, 1Vp-p, Internal Reference)
fIN = 20MHz
SFDR = 61.6dBFS
SNR = 51dBFS
7.5 15 22.5 30
Frequency (MHz)
37.5
®
5 ADS828
5 Page includes logic functions that allows setting the analog input
swing of the ADS828 to either a 1Vp-p or 2Vp-p full-scale
range by simply tying the RSEL pin to a Low or High
potential, respectively. While operating the ADS828 in the
external reference mode, the buffer amplifiers for the REFT
and REFB are disconnected from the reference ladder.
As shown, the ADS828 has internal 50kΩ pull-up resistors
at the range select pin (RSEL) and reference select pin
(INT/EXT). Leaving these pins open configures the ADS828
for a 2Vp-p input range and external reference operation.
Setting the ADS828 up for internal reference mode requires
to bringing the INT/EXT pin low.
The reference buffers can be utilized to supply up to 1mA
(sink and source) to external circuitry. The resistor ladder of
the ADS828 is divided into several segments and has two
additional nodes, ByT and ByB, which are brought out for
external bypassing only (Figure 6). To ensure proper opera-
tion with any reference configurations, it is necessary to
provide solid bypassing at all reference pins in order to keep
the clock feedthrough to a minimum. All bypassing capaci-
tors should be located as close to their respective pins as
possible.
REFT
+3.5V
R1
1.0kΩ
ADS828
R2
1.0kΩ
REFB
+1.5V
0.1µF
CMV
+2.5V
0.1µF
FIGURE 7. Alternative Circuit to Generate CM Voltage.
The common-mode voltage available at the CM-pin may be
used as a bias voltage to provide the appropriate offset for
the driving circuitry. However, care must be taken not to
appreciably load this node, which is not buffered and has a
high impedance. An alternative way of generating a com-
mon-mode voltage is given in Figure 7. Here, two external
precision resistors (tolerance 1% or better) are located
between the top and bottom reference pins. The common-
mode voltage, CMV, will appear at the midpoint.
EXTERNAL REFERENCE OPERATION
For even more design flexibility, the internal reference can
be disabled and an external reference voltage be used. The
utilization of an external reference may be considered for
applications requiring higher accuracy, improved tempera-
ture performance, or a wide adjustment range of the
converter’s full-scale range. Especially in multichannel
applications, the use of a common external reference has the
benefit of obtaining better matching of the full-scale range
between converters.
The external references can vary as long as the value of the
external top reference REFTEXT stays within the range of
(VS – 1.25V) and (REFB + 0.8V), and the external bottom
reference REFBEXT stays within 1.25V and (REFT – 0.8V).
See Figure 8.
DIGITAL INPUTS AND OUTPUTS
Clock Input Requirements
Clock jitter is critical to the SNR performance of high speed,
high resolution A/D converters. Clock jitter leads to aperture
jitter (tA), which adds noise to the signal being converted. The
ADS828 samples the input signal on the rising edge of the
CLK input. Therefore, this edge should have the lowest
possible jitter. The jitter noise contribution to total SNR is
A - Short for 1Vp-p Input Range
B - Short for 2Vp-p Input Range (Default)
VIN
CMV
+2.5VDC
IN
IN
+5V
BA
+VS INT/EXT
RSEL
ADS828
REFT
ByT
GND
ByB
GND
REFB
External Top Reference
REFT = REFB +0.8V to +3.75V
4 x 0.1µF || 2.2µF
FIGURE 8. Configuration Example for External Reference Operation.
11
External Bottom Reference
REFB = REFT –0.8V to +1.25V
ADS828
®
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet ADS828E.PDF ] |
Número de pieza | Descripción | Fabricantes |
ADS828 | 10-Bit/ 75MHz Sampling ANALOG-TO-DIGITAL CONVERTER | Burr-Brown Corporation |
ADS828 | ADS828: SpeedPlus 10-Bit 75MHz Sampling Analog-To-Digital Converter (Rev. A) | Texas Instruments |
ADS8284 | 18-Bit 1-MSPS Pseudo-Bipolar Differential SAR ADC with On-Chip ADC Driver (OP (Rev. A) | Texas Instruments |
ADS828E | 10-Bit/ 75MHz Sampling ANALOG-TO-DIGITAL CONVERTER | Burr-Brown Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |