DataSheetWiki


ADXL103 fiches techniques PDF

Analog Devices - Dual-Axis iMEMS Accelerometer

Numéro de référence ADXL103
Description Dual-Axis iMEMS Accelerometer
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADXL103 fiche technique
Data Sheet
Precision ±1.7 g, ±5 g, ±18 g Single-/
Dual-Axis iMEMS® Accelerometer
ADXL103/ADXL203
FEATURES
High performance, single-/dual-axis accelerometer on
a single IC chip
5 mm × 5 mm × 2 mm LCC package
1 mg resolution at 60 Hz
Low power: 700 µA at VS = 5 V (typical)
High zero g bias stability
High sensitivity accuracy
−40°C to +125°C temperature range
X and Y axes aligned to within 0.1° (typical)
Bandwidth adjustment with a single capacitor
Single-supply operation
3500 g shock survival
RoHS compliant
Compatible with Sn/Pb- and Pb-free solder processes
Qualified for automotive applications
APPLICATIONS
Vehicle dynamic controls
Electronic chassis controls
Platform stabilization/leveling
Navigation
Alarms and motion detectors
High accuracy, 2-axis tilt sensing
Vibration monitoring and compensation
Abuse event detection
GENERAL DESCRIPTION
The ADXL103/ADXL203 are high precision, low power, complete
single- and dual-axis accelerometers with signal conditioned
voltage outputs, all on a single, monolithic IC. The ADXL103/
ADXL203 measure acceleration with a full-scale range of ±1.7 g,
±5 g, or ±18 g. The ADXL103/ADXL203 can measure both
dynamic acceleration (for example, vibration) and static
acceleration (for example, gravity).
The typical noise floor is 110 µg/√Hz, allowing signals below 1 mg
(0.06° of inclination) to be resolved in tilt sensing applications
using narrow bandwidths (<60 Hz).
The user selects the bandwidth of the accelerometer using
Capacitor CX and Capacitor CY at the XOUT and YOUT pins.
Bandwidths of 0.5 Hz to 2.5 kHz can be selected to suit the
application.
The ADXL103 and ADXL203 are available in a 5 mm × 5 mm ×
2 mm, 8-terminal ceramic LCC package.
FUNCTIONAL BLOCK DIAGRAMS
+5V +5V
VS
ADXL103
VS
ADXL203
CDC
SENSOR
COM
AC
AMP
DEMOD
OUTPUT
AMP
RFILT
32kΩ
ST XOUT
CX
CDC
SENSOR
COM
AC
AMP
DEMOD
OUTPUT
AMP
OUTPUT
AMP
RFILT
32kΩ
RFILT
32kΩ
ST
YOUT
XOUT
CY CX
Figure 1.
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2004–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 16
Télécharger [ ADXL103 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADXL1001 High Frequency MEMS Accelerometers Analog Devices
Analog Devices
ADXL1002 High Frequency MEMS Accelerometers Analog Devices
Analog Devices
ADXL103 Dual-Axis iMEMS Accelerometer Analog Devices
Analog Devices
ADXL105 High Accuracy 61 g to 65 g Single Axis iMEMS Accelerometer with Analog Input Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche