|
|
Número de pieza | 0603YC103KAT | |
Descripción | 9.9-11.2Gb/s Optical Modulator Driver | |
Fabricantes | TriQuint Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 0603YC103KAT (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! Advance Product Datasheet
June 10, 2003
9.9-11.2Gb/s Optical Modulator Driver
TGA4953-EPU
OC-192 Metro and Long Haul Applications
Surface Mount Package
Key Features and Performance
• Metro MSA Compatible
• Wide Drive Range (3V to 10V)
• Single-ended Input / Output
• Low Power Dissipation (1W at Vo=6V)
• Very Low Rail Ripple
• 25 ps Edge Rates (20/80)
• Small Form Factor
- 11.4 x 8.9 x 2 mm
- 0.450 x 0.350 x 0.080 inches
• Evaluation Board Available.
Description
The TriQuint TGA4953-EPU is part of a series of surface
mount modulator drivers suitable for a variety of driver
applications and is compatible with Metro MSA standards.
The 4953 consists of two high performance wideband
amplifiers combined with off chip circuitry assembled in a
surface mount package. A single 4953 placed between
the MUX and Optical Modulator provides OEMs with a
board level modulator driver surface mount solution.
The 4953 provides Metro and Long Haul designers with
system critical features such as: low power dissipation
(1.1 W at Vo=6 V), very low rail ripple, high voltage drive
capability at 5V bias (6 V amplitude adjustable to 3 V), low
output jitter (10 ps typical), and low input drive sensitivity
(250 mV at Vo=6 V).
Primary Applications
• Mach-Zehnder Modulator Driver for
Metro and Long Haul.
Measured Performance
TGA4953 Evaluation Board (Metro MSA Conditions)
10.7 Gb/s, Vplus=5 V, Id=210 mA, (Pdc=1.1 Watt)
Vout=6 Vpp, CPC=50%, Vin = 500 mVpp
Scale: 2 V/div, 15 ps/div
The 4953 requires external DC blocks, a low frequency
choke, and control circuitry.
The TGA4953-EPU is available on an evaluation board.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
1
1 page Advance Product Datasheet
TGA4953EPU
RF SPECIFICATION
(Continued)
Notes:
1/ Verified at package level RF test.
2/ Package RF Test Bias: Vd=5 V, adjust Vg1 to achieve Id=65 mA then adjust Vg2 to achieve
Id=200mA, Vctrl=+0.2 V
3/ Verified by design, SMT assembled onto a demonstration board detailed on sheet 6.
4/ Vin=250mV, Data Rate = 10.7Gb/s, VD1=VD2T or greater, VCTRL2 and VG2 are adjusted for maximum output.
5/ Computed using RSS Method where Jrms_additive = SQRT(Jrms_out2 - Jrms_in2)
6/ Verified at die level on-wafer probe.
7/ Power Bias Die Probe: Vtee=8 V, adjust Vg to achieve Id=175 mA+/-5%, Vctrl=1.5 V
Note: At the die level, drain bias is applied thru the RF output port using a bias tee, voltage
is at the DC input to the bias tee.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
5
5 Page Advance Product Datasheet
TGA4953EPU
Typical Bias Conditions
Vdd=5V
Vo(V)
6
5
4
3
Vg1(V)
-0.66
-0.66
-0.66
-0.66
Vg2(V)
-0.57
-0.59
-0.67
-0.74
Id
221
198
172
147
Vctrl2
+0.22
+0.04
-0.14
-0.34
Notes:
1. Vdd=5V, Id1=65mA, and Vctrl1=-0.2V
2. Vin=500mVpp
3. 50%CPC
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process
specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas : (972)994 8465 Fax (972)994 8504 Web: www.triquint.com
11
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet 0603YC103KAT.PDF ] |
Número de pieza | Descripción | Fabricantes |
0603YC103KAT | 9.9-11.2Gb/s Optical Modulator Driver | TriQuint Semiconductor |
0603YC103KAT | 9.9-11.2Gb/s Optical Modulator Driver | TriQuint Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |