|
|
Número de pieza | C106 | |
Descripción | Sensitive Gate Silicon Controlled Rectifiers | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de C106 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! C106 Series
Sensitive Gate Silicon
Controlled Rectifiers
Reverse Blocking Thyristors
Glassivated PNPN devices designed for high volume consumer
applications such as temperature, light, and speed control; process and
remote control, and warning systems where reliability of operation is
important.
Features
• Glassivated Surface for Reliability and Uniformity
• Power Rated at Economical Prices
• Practical Level Triggering and Holding Characteristics
• Flat, Rugged, Thermopad Construction for Low Thermal Resistance,
High Heat Dissipation and Durability
• Sensitive Gate Triggering
• These are Pb−Free Devices
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Characteristic
Symbol Max
Unit
Peak Repetitive Off−State Voltage (Note 1)
(Sine Wave, 50−60 Hz, RGK = 1 kW,
TC = −40° to 110°C)
C106B
C106D, C106D1*
C106M, C106M1*
VDRM,
VRRM
200
400
600
V
On-State RMS Current
(180° Conduction Angles, TC = 80°C)
Average On−State Current
(180° Conduction Angles, TC = 80°C)
IT(RMS)
IT(AV)
4.0
2.55
A
A
Peak Non-Repetitive Surge Current
(1/2 Cycle, Sine Wave, 60 Hz, TJ = +25°C)
Circuit Fusing Considerations (t = 8.3 ms)
ITSM
I2t
20
1.65
A
A2s
Forward Peak Gate Power
(Pulse Width v1.0 msec, TC = 80°C)
Forward Average Gate Power
(Pulse Width v1.0 msec, TC = 80°C)
Forward Peak Gate Current
(Pulse Width v1.0 msec, TC = 80°C)
Operating Junction Temperature Range
PGM
PG(AV)
IGM
TJ
0.5
0.1
0.2
−40 to
+110
W
W
A
°C
Storage Temperature Range
Tstg − 40 to °C
+150
Mounting Torque (Note 2)
− 6.0 in. lb.
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings
apply for zero or negative gate voltage; however, positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. Torque rating applies with use of compression washer (B52200F006).
Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink
thermal resistance. Anode lead and heatsink contact pad are common.
http://onsemi.com
SCRs
4 A RMS, 200 − 600 Volts
G
AK
TO−225AA
CASE 077
STYLE 2
MARKING DIAGRAM & PIN ASSIGNMENT
1. Cathode
2. Anode
3. Gate
YWW
C106xxG
Y
WW
C106xx
xx
G
= Year
= Work Week
= Device Code
= B, D, D1, M, M1
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
September, 2011 − Rev. 10
1
Publication Order Number:
C106/D
1 page C106 Series
PACKAGE INTERCHANGEABILITY
The dimensional diagrams below compare the critical dimensions of the ON Semiconductor C-106 package with
competitive devices. It has been demonstrated that the smaller dimensions of the ON Semiconductor package make it
compatible in most lead-mount and chassis-mount applications. The user is advised to compare all critical dimensions for
mounting compatibility.
_.2_9_5_
.305
_.1_4_5_
.155
_.1_4_8_
.158
123
_.0_5_0_
.095
_.1_1_5_
.130
_.4_2_5_ 5_ TYP
.435
_.5_7_5_
.655
.040
.094 BSC
_.0_2_5_
.035
_.0_2_0_
.026
_.0_9_5_
.105
_.0_1_5_
.025
_.0_4_5_
.055
_.1_3_5_
.115
_.3_8_5_
.365
_.4_2_0_
.400
_.1_0_5_
.095
_.4_0_0_
.360
_.1_2_7_ DIA
.123
_.5_2_0_
.480
_.3_1_5_
.285
_.1_0_5_
.095
_.0_5_4_
.046
_.0_2_6_
.019
_.1_9_0_
.170
ON Semiconductor C-106 Package
Competitive C-106 Package
ORDERING INFORMATION
Device
Package
C106BG
TO−225AA
(Pb−Free)
C106DG
TO−225AA
(Pb−Free)
C106D1G*
TO−225AA
(Pb−Free)
C106MG
TO−225AA
(Pb−Free)
C106M1G*
TO−225AA
(Pb−Free)
*D1 signifies European equivalent for D suffix and M1 signifies European equivalent for M suffix.
Shipping†
500 Units / Box
500 Units / Box
500 Units / Box
500 Units / Box
500 Units / Box
http://onsemi.com
5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet C106.PDF ] |
Número de pieza | Descripción | Fabricantes |
C10-FR1 | Power Inductors | Mitsumi Electronics |
C10-H | Power Inductors | Mitsumi Electronics |
C10-K | Power Inductors | Mitsumi Electronics |
C1000 | Fixed and Adjustable Vitreous Enamel Power Resistors | Ohmite |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |