|
|
Número de pieza | CBT6832 | |
Descripción | INTEGRATED CIRCUITS | |
Fabricantes | NXP Semiconductors | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CBT6832 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
CBT6820
20-bit bus switch with precharged outputs
and Schottky undershoot protection for
live insertion
Product specification
1999 Apr 05
Philips
Semiconductors
1 page Philips Semiconductors
20-bit bus switch with precharged outputs and
Schottky undershoot protection for live insertion
Product specification
CBT6820
AC CHARACTERISTICS FOR VCC = 5.0V ±0.5V RANGE
GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF.
LIMITS
SYMBOL
PARAMETER
WAVEFORM
Tamb = –40 to +85°C
MIN TYP1 MAX
UNIT
tpd Propagation delay; An to Bn; Bn to An2
tPZH
3-State output enable time
OE to An; OE to Bn; BIASV = GND
1 0.25 ns
2
1.3 3.1 5.3
ns
tPZL
3-State output enable time
OE to An; OE to Bn; BIASV = 3.0V
2
1.4 2.9 4.6
ns
tPHZ
3-State output enable time
OE to An; OE to Bn; BIASV = GND
2
1.7 2.8 4.5
ns
tPLZ
3-State output enable time
OE to An; OE to Bn; BIASV = 3.0V
2
2.8 4.4 6.6
ns
NOTE:
1. All typical values are measured at Tamb = 25°C and VCC = 5.0V
2. Warranted but not production tested. The propagation delay is based on the RC time constant of the typical ON-state resistance of the
switch and a load capacitance of 50pF, when driven by an ideal voltage source (zero output impedance)
AC WAVEFORMS
VM = 1.5V, VIN = GND to 3.0V
3V
INPUT
1.5V
tPLH
1.5V
tPHL
0V
VOH
OUTPUT
1.5V
1.5V
VOL
SA00028
Waveform 1. Waveforms Showing the Input (An) to Output (Bn)
Propagation Delays
TEST CIRCUIT AND WAVEFORMS
From Output
Under Test
CL = 50 pF
500 Ω
500 Ω
7V
S1
Open
GND
Load Circuit
TEST
S1
tpd
tPLZ/tPZL
tPHZ/tPZH
open
7V
open
DEFINITIONS
CL = Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
Output Control
(Low-level
enabling
1.5 V
1.5 V
3V
tPZL
Output
Waveform 1
S1 at 7 V
(see Note)
tPZH
Output
Waveform 2
S1 at Open
(see Note)
1.5 V
1.5 V
tPLZ
tPHZ
0V
3.5V
VOL + 0.3V
VOL
VOH
VOH – 0.3V
0V
Note:
Waveform 1 is for an output with internal conditions such that
the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that
the output is high except when disabled by the output control.
SA00029
Waveform 2. Waveforms Showing the 3-State Output Enable
and Disable Times
SA00012
NOTES:
1. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 10MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
2. The outputs are measured one at a time with one transition per
measurement.
1999 Apr 05
5
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet CBT6832.PDF ] |
Número de pieza | Descripción | Fabricantes |
CBT6832 | INTEGRATED CIRCUITS | NXP Semiconductors |
CBT6832DGG | INTEGRATED CIRCUITS | NXP Semiconductors |
CBT6832E | 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs and Schottky undershoot protection for live insertion | NXP Semiconductors |
CBT6832EDGG | 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs and Schottky undershoot protection for live insertion | NXP Semiconductors |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |