DataSheetWiki


HCPL-063L fiches techniques PDF

Avago - High Speed LVTTL Compatible 3.3 V Optocouplers

Numéro de référence HCPL-063L
Description High Speed LVTTL Compatible 3.3 V Optocouplers
Fabricant Avago 
Logo Avago 





1 Page

No Preview Available !





HCPL-063L fiche technique
HCPL-260L/060L/263L/063L
High Speed LVTTL Compatible 3.3 V Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-260L/060L/263L/063L are optically coupled
gates that combine a GaAsP light emitting diode and
an integrated high gain photo detector. An enable in-
put allows the detector to be strobed. The output of
the detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed
common mode transient immunity specification of
15 kV/µs at 3.3V.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compati-bili-
ty. The optocoupler AC and DC operational parameters
are guaranteed from –40 °C to +85 °C allowing trouble-
free system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
HCPL-260L/060L
HCPL-263L/063L
NC 1
8 VCC ANODE 1 1
8 VCC
ANODE 2
7 VE CATHODE 1 2
7 VO1
CATHODE 3
6 VO CATHODE 2 3
6 VO2
NC 4 SHIELD
5 GND
Truth Table
(Positive Logic)
LED Enable Output
ON H
L
OFF H
H
ON L
H
OFF L
H
ON NC L
OFF NC H
ANODE 2 4
SHIELD
5 GND
Truth Table
(Positive Logic)
LED Output
ON L
OFF H
Features
3.3V/5V Dual Supply Voltages
Low power consumption
15 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 1000 V
High speed: 15 MBd typical
LVTTL/LVCMOS compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over tempera-
ture: –40 °C to +85 °C
Available in 8-pin DIP, SOIC-8
Strobable output (single channel products only)
Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5
Applications
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Field buses
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.

PagesPages 19
Télécharger [ HCPL-063L ]


Fiche technique recommandé

No Description détaillée Fabricant
HCPL-0630 High Speed TTL Compatible Optocouplers HP
HP
HCPL-0630 High Speed TTL Compatible Optocouplers Avago
Avago
HCPL-0631 High Speed TTL Compatible Optocouplers HP
HP
HCPL-0631 High Speed TTL Compatible Optocouplers Avago
Avago

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche