R5F10367ASP Datasheet PDF - Renesas
| Part Number | R5F10367ASP | |
| Description | MCU ( Micro Controller Unit ) | |
| Manufacturers | Renesas | |
| Logo |  |
|
|
There is a preview and R5F10367ASP download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
Datasheet
RL78/G12
RENESAS MCU
True Low Power Platform (as low as 63 μA/MHz), 1.8V to 5.5V operation,
2 to 16 Kbyte Flash, 31 DMIPS at 24MHz, for General Purpose Applications
R01DS0193EJ0210
Rev.2.10
Mar 25, 2016
1. OUTLINE
1.1 Features
Ultra-low power consumption technology
VDD = single power supply voltage of 1.8 to 5.5 V which
can operate at a low voltage
HALT mode
STOP mode
SNOOZE mode
RL78 CPU core
CISC architecture with 3-stage pipeline
Minimum instruction execution time: Can be changed
from high speed (0.04167 s: @ 24 MHz operation with
high-speed on-chip oscillator) to ultra-low speed (1 s:
@ 1 MHz operation)
Address space: 1 MB
General-purpose registers: (8-bit register x 8) x 4 banks
On-chip RAM: 256 B to 2 KB
DMA (Direct Memory Access) controller Note
2 channels
Number of clocks during transfer between 8/16-bit SFR
and internal RAM: 2 clocks
Multiplier and divider/multiply-accumulator
16 bits x 16 bits = 32 bits (Unsigned or signed)
32 bits x 32 bits = 32 bits (Unsigned)
16 bits x 16 bits + 32 bits = 32 bits (Unsigned or
signed)
Serial interface
CSI
UART
Simplified I2C communication
I2C communication
: 1 to 3 channels
: 1 to 3 channels
: 0 to 3 channels
: 1 channel
Code flash memory
Code flash memory: 2 to 16 KB
Block size: 1 KB
Prohibition of block erase and rewriting (security
function)
On-chip debug function
Self-programming (with flash shield window function)
Data flash memory Note
Data flash memory: 2 KB
Back ground operation (BGO): Instructions are
executed from the program memory while rewriting the
data flash memory.
Number of rewrites: 1,000,000 times (TYP.)
Voltage of rewrites: VDD = 1.8 to 5.5 V
High-speed on-chip oscillator
Select from 24 MHz, 16 MHz, 12 MHz, 8 MHz, 6 MHz,
4 MHz, 3 MHz, 2 MHz, and 1 MHz
High accuracy: +/- 1.0 % (VDD = 1.8 to 5.5 V, TA = -20
to +85 °C)
Operating ambient temperature
TA = -40 to +85 °C (A: Consumer applications, D:
Industrial applications)
TA = -40 to +105 °C (G: Industrial applications) Note
Timer
16-bit timer
: 4 to 8 channels
12-bit interval timer : 1 channel
Watchdog timer : 1 channel (operable with the
dedicated low-speed on-chip
oscillator)
A/D converter
8/10-bit resolution A/D converter (VDD = 1.8 to 5.5 V)
8 to 11 channels, internal reference voltage (1.45 V),
and temperature sensor Note
I/O port
I/O port: 18 to 26
(N-ch open drain I/O [withstand voltage of 6 V]: 2,
N-ch open drain I/O [VDD withstand voltage]: 4 to 9)
Can be set to N-ch open drain, TTL input buffer, and
on-chip pull-up resistor
Different potential interface: Can connect to a 1.8/2.5/3
V device
On-chip key interrupt function
On-chip clock output/buzzer output controller
Others
On-chip BCD (binary-coded decimal) correction circuit
Power management and reset function
On-chip power-on-reset (POR) circuit
On-chip voltage detector (LVD) (Select interrupt and
reset from 12 levels)
Note Can be selected only in HS (high-speed main) mode.
Remark The functions mounted depend on the product.
See 1.7 Outline of Functions.
* There is difference in specifications between every product.
Please refer to specification for details.
R01DS0193EJ0210 Rev.2.10
Mar 25, 2016
Page 1 of 106
|
| |
 
RL78/G12
1. OUTLINE
1.3 Differences between the R5F102 Products and the R5F103 Products
The following are differences between the R5F102 products and the R5F103 products.
Whether the data flash memory is mounted or not
High-speed on-chip oscillator oscillation frequency accuracy
Number of channels in serial interface
Whether the DMA function is mounted or not
Whether a part of the safety functions are mounted or not
1.3.1 Data Flash
The data flash memory of 2 KB is mounted on the R5F102 products, but not on the R5F103 products.
Product
R5F102 products
R5F1026A, R5F1027A, R5F102AA,
R5F10269, R5F10279, R5F102A9,
R5F10268, R5F10278, R5F102A8,
R5F10267, R5F10277, R5F102A7,
R5F10266 Note
R5F103 products
R5F1036A, R5F1037A, R5F103AA,
R5F10369, R5F10379, R5F103A9,
R5F10368, R5F10378 R5F103A8,
R5F10367, R5F10377, R5F103A7,
R5F10366
Data Flash
2KB
Not mounted
Note The RAM in the R5F10266 has capacity as small as 256 bytes. Depending on the customer's program
specification, the stack area to execute the data flash library may not be kept and data may not be written to or
erased from the data flash memory.
Caution When the flash memory is rewritten via a user program, the code flash area and RAM area are used
because each library is used. When using the library, refer to RL78 Family Flash Self Programming Library
Type01 User's Manual and RL78 Family Data Flash Library Type04 User's Manual.
R01DS0193EJ0210 Rev.2.10
Mar 25, 2016
Page 5 of 106
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for R5F10367ASP electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ R5F10367ASP.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| R5F10367ASP | The function is MCU ( Micro Controller Unit ). Renesas | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
R5F1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||