DataSheetWiki


SAM4S4C fiches techniques PDF

ATMEL Corporation - SMART ARM-based Flash MCU

Numéro de référence SAM4S4C
Description SMART ARM-based Flash MCU
Fabricant ATMEL Corporation 
Logo ATMEL Corporation 





1 Page

No Preview Available !





SAM4S4C fiche technique
SAM4S Series
Atmel | SMART ARM-based Flash MCU
DATASHEET
Description
The Atmel® | SMART SAM4S series is a member of a family of Flash
microcontrollers based on the high-performance 32-bit ARM® Cortex®-M4 RISC
processor. It operates at a maximum speed of 120 MHz and features up to
2048 Kbytes of Flash, with optional dual-bank implementation and cache
memory, and up to 160 Kbytes of SRAM. The peripheral set includes a full-speed
USB Device port with embedded transceiver, a high-speed MCI for
SDIO/SD/MMC, an External Bus Interface featuring a Static Memory Controller to
connect to SRAM, PSRAM, NOR Flash, LCD Module and NAND Flash, 2
USARTs, 2 UARTs, 2 TWIs, 3 SPIs, an I2S, as well as a PWM timer, two 3-
channel general-purpose 16-bit timers (with stepper motor and quadrature
decoder logic support), an RTC, a 12-bit ADC, a 12-bit DAC and an analog
comparator.
The SAM4S series is ready for capacitive touch, offering native support for the
Atmel QTouch® library for easy implementation of buttons, wheels and sliders.
The Atmel | SMART SAM4S devices have three software-selectable low-power
modes: Sleep, Wait and Backup. In Sleep mode, the processor is stopped while
all other functions can be kept running. In Wait mode, all clocks and functions are
stopped but some peripherals can be configured to wake up the system based on
predefined conditions. In Backup mode, only the low-power RTC and wakeup
logic are running.
The real-time event management allows peripherals to receive, react to and send
events in Active and Sleep modes without processor intervention.
The SAM4S device is a medium-range general-purpose microcontroller with the
best ratio in terms of reduced power consumption, processing power and
peripheral set. This enables the SAM4S to sustain a wide range of applications
that includes consumer, industrial control, and PC peripherals.
SAM4S devices operate from 1.62V to 3.6V.
The SAM4S series is pin-to-pin compatible with the SAM3N, SAM3S series (48-,
64- and 100-pin versions), SAM4N and SAM7S legacy series (64-pin versions).
Atmel-11100K-ATARM-SAM4S-Datasheet_09-Jun-15

PagesPages 30
Télécharger [ SAM4S4C ]


Fiche technique recommandé

No Description détaillée Fabricant
SAM4S4A SMART ARM-based Flash MCU ATMEL Corporation
ATMEL Corporation
SAM4S4B SMART ARM-based Flash MCU ATMEL Corporation
ATMEL Corporation
SAM4S4C SMART ARM-based Flash MCU ATMEL Corporation
ATMEL Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche