DataSheetWiki


CAT511 fiches techniques PDF

Catalyst Semiconductor - 8-Bit Digital POT with Independent Reference Inputs

Numéro de référence CAT511
Description 8-Bit Digital POT with Independent Reference Inputs
Fabricant Catalyst Semiconductor 
Logo Catalyst Semiconductor 





1 Page

No Preview Available !





CAT511 fiche technique
Advanced Information
CAT511
8-Bit Digital POT with Independent Reference Inputs
FEATURES
s Output settings retained without power
s Output range includes both supply rails
s Programming voltage generated on-chip
s Serial µP interface
s Single supply operation: 2.7V-5.5V
APPLICATIONS
s Automated product calibration.
s Remote control adjustment of equipment
s Offset, gain and zero adjustments in Self-
Calibrating and Adaptive Control systems.
s Tamper-proof calibrations.
DESCRIPTION
The CAT511 is an 8-Bit Memory DAC designed as an
electronic replacement for mechanical potentiometers
and trim pots. Intended for final calibration of products
such as camcorders, fax machines and cellular tele-
phones on automated high volume production lines and
systems capable of self calibration, it is also well suited
for applications were equipment requiring periodic ad-
justment is either difficult to access or located in a
hazardous environment.
The CAT511 consists of a programmable DAC with
independent high and low reference inputs and is ca-
pable of a rail to rail output swing. Output settings, stored
non-volatile EEPROM memory, are not lost when the
device is powered down and are automatically rein-
stated when power is returned. The output can be
dithered to test new output values without effecting the
stored setting and can be read back without disturbing
the DAC’s output.
FUNCTIONAL DIAGRAM
VDD
1
RDY/BSY
3
SERIAL DATA OUTPUT
6
DO
PROG
7
PROGRAM
CONTROL
CLK
2
4
CS
5
DI
DATA
CONTROLLER
EEPROM
LATCH
DAC 1
14 VREF H1
12 VOUT 1
9 VREF L1
H.V.
CHARGE
PUMP
CAT511
8
GND
Control of the CAT511 is accomplished with a simple 3
wire serial interface. A Chip Select pin allows several
CAT511's to share a common serial interface and com-
munications back to the host controller is via a single
serial data line thanks to the CAT511’s Tri-Stated Data
Output pin. A RDY/BSYoutput working in concert with
an internal low voltage detector signals proper operation
of EEPROM Erase/Write cycle.
The CAT511 operates from a single 3–5 volt power
supply. The high voltage required for EEPROM Erase/
Write operations is generated on-chip.
The CAT511 is available in the 0°C to 70°C Commercial
and –40°C to +85°C Industrial operating temperature
ranges and offered in 14-pin plastic DIP and Surface
mount packages.
PIN CONFIGURATION
DIP Package (P)
SOIC Package (J)
VDD
CLK
RDY/BSY
CS
DI
DO
PROG
1 14
2 13
3 12
4 11
CAT511
5 10
69
78
VREF H1
NC
VOUT1
NC
NC
VREF L1
GND
VDD
CLK
RDY/BSY
CS
DI
DO
PROG
1 14
2 13
3 12
4 11
CAT511
5 10
69
78
VREF H1
NC
VOUT1
NC
NC
VREF L1
GND
© 2001 by Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
1

PagesPages 9
Télécharger [ CAT511 ]


Fiche technique recommandé

No Description détaillée Fabricant
CAT511 8-Bit Digital POT with Independent Reference Inputs Catalyst Semiconductor
Catalyst Semiconductor
CAT5110 32-tap Digital Potentiometers ON Semiconductor
ON Semiconductor
CAT5110 (CAT5110 - CAT5125) Digitally Programmable Potentiometers Catalyst Semiconductor
Catalyst Semiconductor
CAT5111 100-Tap Digitally Programmable Potentiometer ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche