XR16M570 Datasheet PDF - Exar
| Part Number | XR16M570 | |
| Description | 1.62V TO 3.63V HIGH PERFORMANCE UART | |
| Manufacturers | Exar | |
| Logo |  |
|
|
There is a preview and XR16M570 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
XR16M570
1.62V TO 3.63V HIGH PERFORMANCE UART WITH 16-BYTE FIFO
DECEMBER 2009
REV. 1.0.1
GENERAL DESCRIPTION
The XR16M5701 (M570) is an enhanced Universal
Asynchronous Receiver and Transmitter (UART) with
16 bytes of transmit and receive FIFOs, selectable
transmit and receive FIFO trigger levels, automatic
hardware and software flow control, and data rates of
up to 16 Mbps at 3.3V, 12.5 Mbps at 2.5V and 7.5
Mbps at 1.8V with 4X data sampling rate.
The Auto RS-485 Half-Duplex Direction control
feature simplifies both the hardware and software for
half-duplex RS-485 applications. In addition, the
Multidrop mode with Auto Address detection
increases the performance by simplifying the
software routines.
The Independent TX/RX Baud Rate Generator
feature allows the transmitter and receiver to operate
at different baud rates. Power consumption of the
M570 can be minimized by enabling the sleep mode
and PowerSave mode.
The M570 has a 16550 compatible register set that
provide users with operating status and control,
receiver error indications, and modem serial interface
controls. An internal loopback capability allows
onboard diagnostics. The M570 is available in 24-pin
QFN, 32-pin QFN and 25-pin BGA packages. All
three packages offer the 16 mode (Intel bus) interface
only.
NOTE: 1 Covered by U.S. Patent #5,649,122.
FEATURES
• Pin-to-pin compatible with XR16L570 in 24-QFN
and 32-QFN packages
• Intel data bus Interface
• 16 Mbps maximum data rate
• Selectable TX/RX FIFO Trigger Levels
• TX/RX FIFO Level Counters
• Independent TX/RX Baud Rate Generator
• Fractional Baud Rate Generator
• Auto RTS/CTS Hardware Flow Control
• Auto XON/XOFF Software Flow Control
• Auto RS-485 Half-Duplex Direction Control
• Multidrop mode w/ Auto Address Detect
• Sleep Mode with Automatic Wake-up
• PowerSave mode in 24-pin QFN package
• Infrared (IrDA 1.0 and 1.1) mode
• 1.62V to 3.63V supply operation
• Crystal oscillator or external clock input
APPLICATIONS
• Personal Digital Assistants (PDA)
• Cellular Phones/Data Devices
• Battery-Operated Devices
• Global Positioning System (GPS)
• Bluetooth
FIGURE 1. XR16M570 BLOCK DIAGRAM
PwrSave
A2:A0
D 7 :D 0
IO R #
IOW #
CS#
IN T
RESET
Intel
Data Bus
Interface
UART
UART 16 Byte TX FIFO
Regs TX &
RX
IR
ENDEC
BRG 16 Byte RX FIFO
Crystal Osc/Buffer
VCC
(1.62 to 3.63 V)
GND
TX, RX,
RTS#, CTS#,
DTR#, DSR#,
RI#, CD#
XTAL1
XTAL2
Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com
|
| |
 
XR16M570
REV. 1.0.1
1.62V TO 3.63V HIGH PERFORMANCE UART WITH 16-BYTE FIFO
1.0 PRODUCT DESCRIPTION
The XR16M570 (M570) is a higher performance single channel UART. The configuration registers set is
16550 UART compatible for control, status and data transfer. Additionally, the M570 channel has 16 bytes of
transmit and receive FIFOs, Automatic RTS/CTS Hardware Flow Control, Automatic Xon/Xoff and Special
Character Software Flow Control, infrared encoder and decoder (IrDA ver 1.0 and 1.1), programmable
fractional baud rate generator with a prescaler of divide by 1 or 4, and data rate up to 16 Mbps. The XR16M570
can operate from 1.62 to 3.63 volts. The M570 is fabricated with an advanced CMOS process.
Data Rate
The M570 is capable of operation up to 16 Mbps at 3.3V with 4X internal sampling clock rate. The device can
operate at 3.3V with a 24 MHz crystal on pins XTAL1 and XTAL2, or external clock source of 64 MHz on XTAL1
pin. With a typical crystal of 14.7456 MHz and through a software option, the user can set the prescaler bit and
sampling rate for data rates of up to 3.68 Mbps.
Enhanced Features
The rich feature set of the M570 is available through the internal registers. Automatic hardware/software flow
control, selectable transmit and receive FIFO trigger levels, selectable baud rates, infrared encoder/decoder,
modem interface controls, and a sleep mode are all standard features. MCR bit-5 provides a facility for turning
off (Xon) software flow control with any incoming (RX) character. The M570 includes new features such as 9-bit
(Multidrop) mode, auto RS-485 half-duplex direction control, different baud rate for TX and RX, fast IR mode
and fractional baud rate generator.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for XR16M570 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ XR16M570.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| XR16M570 | The function is 1.62V TO 3.63V HIGH PERFORMANCE UART. Exar | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
XR16
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||