|
|
PDF PAM3101 Data sheet ( Hoja de datos )
| Número de pieza | PAM3101 | |
| Descripción | 300mA HIGH PSRR LOW-DROPOUT CMOS LINEAR REGULATOR | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PAM3101 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
|
No Preview Available !
NOT RECOMMENDED FOR NEW DESIGN
USE AP2125/2127
PAM3101
300mA HIGH PSRR LOW-DROPOUT CMOS LINEAR REGULATOR
Description
The PAM3101 series of positive voltage linear regulators feature low
quiescent current (65µA typ.) and low dropout voltage, making them
ideal for battery powered applications. Their high PSRR make them
useful in applications where AC noise on the input power supply must
be suppressed. Space-saving SOT-23, SOT-89, SC70 and
DFN1.6x1.6-6L packages are attractive for portable and handheld
applications. They have both thermal shutdown and current limit
features to prevernt device failure from extreme operating conditions.
They are stable with an output capacitor of 2.2µF or greater.
Pin Assignments
Features
Low Dropout Voltage: 180mV@300mA (VO = 3.3V)
Output Voltage Accuracy within ±2%
Supply Voltage Range: 2.5V to 5.5V
Quiescent Current: 65µA typ.
High PSRR: 70dB@1kHz
Excellent Line and Regulation
Fast Discharge
Current Limiting
Short Circuit Protection
Low Temperature Coefficient
Shutdown Current: 0.5µA
Thermal Shutdown
Space Saving Packages: SOT-23, SOT-89, SC70 and
DFN1.6x1.6
Pb-Free Packages
Applications
Cellular Phones
Bluetooth Earphones
Digital Cameras
Portable Electronics
WLANs
MP3 Players
PAM3101
Document number: DS36419 Rev. 3 - 3
1 of 25
www.diodes.com
May 2016
© Diodes Incorporated
1 page  
NOT RECOMMENDED FOR NEW DESIGN
USE AP2125/2127
Typical Performance Characteristics
(@TA = +25°C, VEN = VIN, CIN = 1µF, CO = 2.2µF, CBYP = 10nF unless otherwise specified.)
PAM3101
PAM3101
Document number: DS36419 Rev. 3 - 3
5 of 25
www.diodes.com
May 2016
© Diodes Incorporated
5 Page 
NOT RECOMMENDED FOR NEW DESIGN
USE AP2125/2127
PAM3101
Application Information
Capacitor Selection and Regulator Stability
Similar to any low dropout regulator, the external capacitors used with the PAM3101 must be carefully selected for regulator stability and
performance.
A capacitor CIN of more than 1μF can be employed in the input pin, while there is no upper limit for the capacitance of CIN. Please note that the
distance between CIN and the input pin of the PAM3101 should not exceed 0.5 inch. Ceramic capacitors are suitable for the PAM3101.
Capacitors with larger values and lower ESR (equivalent series resistance) provide better PSRR and line-transient response.
The PAM3101 is designed specifically to work with low ESR ceramic output capacitors in order to save space and improve performance. Using
an output ceramic capacitor whose value is >2.2μF with ESR>5mΩ ensures stability.
A 10nF bypass capacitor connected to BYP pin is suggested for suppressing output noise. The capacitor, in series connection with an internal
200kΩ resistor, forms a low-pass filter for noise reduction. Increasing the capacitance will slightly decrease the output noise, but increase the
start-up time.
Load Transient Consideration
Curve 10 of the PAM3101 load-transient response on page 10 shows two components of the output response: a DC shift from the output
impedance due to the load current change and transient response. The DC shift is quite small due to excellent load regulation of the PAM3101.
The transient spike, resulting from a step change in the load current from 1mA to 300mA, is 20mV. The ESR of the output capacitor is critical to
the transient spike. A larger capacitance with smaller ESR results in a smaller spike.
Shutdown Input Operation
The PAM3101 is shut down by pulling the EN input low, and is turned on by tying the EN input to VIN.
Internal P-Channel Pass Transistor
The PAM3101 features a 0.75Ω P-Channel MOSFET device as a pass transistor. The PMOS pass transistor enables the PAM3101 to consume
only 65μA of ground current during low dropout, light-load, or heavy-load operations. This feature increases the battery operation life time.
Input-Output (Dropout) Voltage
A regulator's minimum input-output voltage difference (or dropout voltage) determines the lowest usable supply voltage. The PAM3101 has a
typical 300mV dropout voltage. In battery powered systems, this will determine the useful end-of-life battery voltage.
Current Limit and Short Circuit Protection
The PAM3101 features a current limit, which monitors and controls the gate voltage of the pass transistor. The output current can be limited to
400mA by regulating the gate voltage. The PAM3101 also has a built-in short circuit current limit.
Thermal Considerations
Thermal protection limits power dissipation in the PAM3101. When the junction temperature exceeds +150°C, the OTP (Over Temperature
Protection) starts the thermal shutdown and turns the pass transistor off. The pass transistor resumes operation after the junction temperature
drops below +120°C.
For continuous operation, the junction temperature should be maintained below +125°C. The power dissipation is defined as:
PD VIN VOUT * IO VIN * IGND
The maximum power dissipation depends on the thermal resistance of IC package, PCB layout, the rate of surrounding airflow and temperature
difference between junction and ambient. The maximum power dissipation can be calculated by the following formula:
PD(MAX) TJ(MAX) TA / JA
Where TJ(MAX) is the maximum allowable junction temperature +125°C , TA is the ambient temperature and θJA is the thermal resistance from the
junction to the ambient.
PAM3101
Document number: DS36419 Rev. 3 - 3
11 of 25
www.diodes.com
May 2016
© Diodes Incorporated
11 Page | ||
| Páginas | Total 25 Páginas | |
| PDF Descargar | [ Datasheet PAM3101.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PAM3101 | 300mA High PSRR Low Dropout CMOS Linear Regulator |  Power Analog Micoelectronics |
| PAM3101 | 300mA HIGH PSRR LOW-DROPOUT CMOS LINEAR REGULATOR | Diodes |
| PAM3102 | Dual 150mA High PSRR Low-Dropout CMOS Regulator | Power Analog Micoelectronics |
| PAM3102 | DUAL 150mA HIGH PSRR LOW-DROPOUT CMOS REGULATOR | Diodes |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |