|
|
Numéro de référence | S29GL064S | ||
Description | 64 Mbit (8 Mbyte) 3.0 V Flash Memory | ||
Fabricant | Cypress Semiconductor | ||
Logo | |||
1 Page
S29GL064S
64 Mbit (8 Mbyte)
3.0 V Flash Memory
Distinctive Characteristics
CMOS 3.0 Volt Core with Versatile I/O
Architectural Advantages
Single Power Supply Operation
Manufactured on 65 nm MirrorBit Process Technology
Secure SiliconRegion
– 128-word / 256-byte sector for permanent, secure identification
through an 8-word / 16-byte random Electronic Serial Number,
accessible through a command sequence
– Programmed and locked at the factory or by the customer
Flexible Sector Architecture
– 64 Mb (uniform sector models): One hundred twenty-eight 32-
kword (64-kB) sectors
– 64 Mb (boot sector models): One hundred twenty-seven 32-kword
(64-kB) sectors + eight 4kword (8kB) boot sectors
Automatic Error Checking and Correction (ECC) - internal hardware
ECC with single bit error correction
Enhanced VersatileI/O Control
– All input levels (address, control, and DQ input levels) and outputs
are determined by voltage on VIO input. VIO range is 1.65 to VCC
Compatibility with JEDEC Standards
– Provides pinout and software compatibility for single-power supply
flash, and superior inadvertent write protection
100,000 Erase Cycles per Sector Minimum
20-year Data Retention Typical
Performance Characteristics
High Performance
– 70 ns access time
– 8-word / 16-byte page read buffer
– 15 ns page read time
– 128-word / 256-byte write buffer which reduces overall
programming time for multiple-word updates
Low Power Consumption
– 25 mA typical initial read current @ 5 MHz
– 7.5 mA typical page read current @ 33 MHz
– 50 mA typical erase / program current
– 40 µA typical standby mode current
Package Options
– 48-pin TSOP
– 56-pin TSOP
– 64-ball Fortified BGA (LAA064 13 mm x 11 mm x 1.4 mm)
(LAE064 9 mm x 9 mm x 1.4 mm)
– 48-ball fine-pitch BGA (VBK048 8.15 mm x 6.15 mm x 1.0 mm)
Temperature Range
– Industrial (-40°C to +85°C)
– Industrial Plus (-40°C to +105°C)
– Automotive, AEC-Q100 Grade 3 (-40°C to +85°C)
– Automotive, AEC-Q100 Grade 2(-40°C to +105°C)
Software and Hardware Features
Software Features
– Advanced Sector Protection: offers Persistent Sector Protection
and Password Sector Protection
– Program Suspend and Resume: read other sectors before
programming operation is completed
– Erase Suspend and Resume: read / program other sectors before
an erase operation is completed
– Data# polling and toggle bits provide status
– CFI (Common Flash Interface) compliant: allows host system to
identify and accommodate multiple flash devices
– Unlock Bypass Program command reduces overall multiple-word
programming time
Hardware Features
– WP#/ACC input supports manufacturing programming operations
(when high voltage is applied). Protects first or last sector
regardless of sector protection settings on uniform sector models
– Hardware reset input (RESET#) resets device
– Ready/Busy# output (RY/BY#) detects program or erase cycle
completion
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-98286 Rev. *E
• San Jose, CA 95134-1709 • 408-943-2600
Revised January 04, 2017
|
|||
Pages | Pages 30 | ||
Télécharger | [ S29GL064S ] |
No | Description détaillée | Fabricant |
S29GL064A | 64 Megabit 3.0-Volt only Page Mode Flash Memory | SPANSION |
S29GL064M | 3.0V single power Flash memory | SPANSION |
S29GL064N | 3V Page Mode MirrorBit Flash | Cypress Semiconductor |
S29GL064N | 3.0-Volt only Page Mode Flash Memory | SPANSION |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |