DataSheetWiki


ZSSC3131 fiches techniques PDF

IDT - Sensor Signal Conditioner

Numéro de référence ZSSC3131
Description Sensor Signal Conditioner
Fabricant IDT 
Logo IDT 





1 Page

No Preview Available !





ZSSC3131 fiche technique
Sensor Signal Conditioner for Cost-
Optimized Switch Applications
ZSSC3131
Datasheet
Brief Description
The ZSSC3131 is a member of the ZSSC313x
product family of CMOS integrated circuits designed
for automotive/ industrial sensor applications. All
family members are well suited for highly-accurate
amplification and sensor-specific correction of
resistive bridge sensor signals. An internal 16-bit
RISC microcontroller running a correction algorithm
compensates sensor offset, sensitivity, temperature
drift, and non-linearity of the connected sensor
element. The required calibration coefficients are
stored by the one-pass calibration procedure in an
on-chip EEPROM.
The ZSSC3131 is optimized for simple switch and
cost-sensitive sensor applications. The integrated
adjustable digital filter enables building fast-switch-
ing real-time applications as well as stabilized
applications for switching input signals that are
unstable or disrupted.
Features
Adjustable to nearly all resistive bridge sensor
types: maximum analog gain of 105; maximum
overall gain of 420
Sample rate up to 200 Hz
ADC resolution 13/14 bit
Internal temperature compensation
Integrated adjustable digital filter
Digital compensation of sensor offset, sensitivity,
temperature drift, and non-linearity
Output options: ratiometric analog voltage output
(5 - 95% maximum, 12.4 bit resolution) or
ZACwireTM (digital One-Wire Interface (OWI))
Sensor biasing by voltage
High voltage protection up to 33 V
Supply current: Max. 5.5mA
Reverse polarity and short circuit protection
Wide operation temperature range:
-40 to +150°C
Traceability by user-defined EEPROM entries
* Note: I2C™ is a trademark of NXP.
** FSO = Full Scale Output.
Benefits
Family approach offers the best fitting IC selec-
tion to build cost-optimized applications
No external trimming components required
Low number of external components needed
PC-controlled configuration and One-Pass/ end-
of-line calibration via I²C™* or ZACwire™
interface: Simple, cost-efficient, quick, and pre-
cise
High accuracy (0.25% FSO** @ -25 to +85°C;
0.5% FSO @ -40 to +125°C)
Optimized for automotive/industrial environments
due to robust protection circuitries, excellent
electromagnetic compatibility, and AEC-Q100
qualification
Available Support
Evaluation Kits
Application Notes
Mass Calibration System
Physical Characteristics
Supply voltage 4.5 to 5.5 V
Operation temperature: -40°C to +125°C
(-40°C to +150°C extended temperature range
depending on product version)
Available in RoHS-compliant JEDEC-SSOP14
package or delivery as die
ZSSC3131 Minimum Application Requirements
Sensor
Module
VCC
ZSSC3131
OUT
GND
© 2016 Integrated Device Technology, Inc.
1
January 25, 2016

PagesPages 23
Télécharger [ ZSSC3131 ]


Fiche technique recommandé

No Description détaillée Fabricant
ZSSC3131 Sensor Signal Conditioner IDT
IDT
ZSSC3135 Sensor Signal Conditioner IDT
IDT
ZSSC3136 Sensor Signal Conditioner IDT
IDT
ZSSC3138 Sensor Signal Conditioner IDT
IDT

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche