DataSheetWiki


ADXL343 fiches techniques PDF

Analog Devices - Digital MEMS Accelerometer

Numéro de référence ADXL343
Description Digital MEMS Accelerometer
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADXL343 fiche technique
Data Sheet
FEATURES
Multipurpose accelerometer with 10- to 13-bit resolution for
use in a wide variety of applications
Digital output accessible via SPI (3- and 4-wire) and I2C
Built-in motion detection features make tap, double-tap,
activity, inactivity, and free-fall detection trivial
User-adjustable thresholds
Interrupts independently mappable to two interrupt pins
Low power operation down to 23 µA and embedded FIFO for
reducing overall system power
Wide supply voltage range: 2.0 V to 3.6 V
I/O voltage 1.7 V to VS
Wide operating temperature range (−40°C to +85°C)
10,000 g shock survival
Small, thin, Pb free, RoHS compliant 3 mm × 5 mm × 1 mm
LGA package
APPLICATIONS
Handsets
Gaming and pointing devices
Hard disk drive (HDD) protection
3-Axis, ±2 g/±4 g/±8 g/±16 g
Digital MEMS Accelerometer
ADXL343
GENERAL DESCRIPTION
The ADXL343 is a versatile 3-axis, digital-output, low g MEMS
accelerometer. Selectable measurement range and bandwidth, and
configurable, built-in motion detection make it suitable for sensing
acceleration in a wide variety of applications. Robustness to
10,000 g of shock and a wide temperature range (−40°C to +85°C)
enable use of the accelerometer even in harsh environments.
The ADXL343 measures acceleration with high resolution (13-bit)
measurement at up to ±16 g. Digital output data is formatted as
16-bit twos complement and is accessible through either an SPI
(3- or 4-wire) or I2C digital interface. The ADXL343 can
measure the static acceleration of gravity in tilt-sensing appli-
cations, as well as dynamic acceleration resulting from motion
or shock. Its high resolution (3.9 mg/LSB) enables measurement
of inclination changes less than 1.0°.
Several special sensing functions are provided. Activity and
inactivity sensing detect the presence or lack of motion. Tap
sensing detects single and double taps in any direction. Free-fall
sensing detects if the device is falling. These functions can be
mapped individually to either of two interrupt output pins.
An integrated memory management system with a 32-level first in,
first out (FIFO) buffer can be used to store data to minimize host
processor activity and lower overall system power consumption.
The ADXL343 is supplied in a small, thin, 3 mm × 5 mm × 1 mm,
14-terminal, plastic package.
ADXL343
FUNCTIONAL BLOCK DIAGRAM
VS VDD I/O
POWER
MANAGEMENT
3-AXIS
SENSOR
SENSE
ELECTRONICS
ADC
DIGITAL
FILTER
CONTROL
AND
INTERRUPT
LOGIC
INT1
INT2
32 LEVEL
FIFO
SERIAL I/O
SDA/SDI/SDIO
SDO/ALT
ADDRESS
SCL/SCLK
GND
CS
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2012 Analog Devices, Inc. All rights reserved.

PagesPages 30
Télécharger [ ADXL343 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADXL343 Digital MEMS Accelerometer Analog Devices
Analog Devices
ADXL344 Ultralow Power Digital MEMS Accelerometer Analog Devices
Analog Devices
ADXL345 Digital Accelerometer Analog Devices
Analog Devices
ADXL345-EP Digital Accelerometer Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche