|
|
PDF HMC802ALP3E Data sheet ( Hoja de datos )
| Número de pieza | HMC802ALP3E | |
| Descripción | 20 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC802ALP3E (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Typical Applications
The HMC802ALP3E is ideal for both RF
and IF applications:
• Test Equipment and Sensors
• ISM, MMDS, WLAN, WiMAX, WiBro
• Microwave Radio & VSAT
• Cellular Infrastructure
Functional Diagram
Features
± 0.6 dB Typical Step Error
Low Insertion Loss: 3 dB
High IP3: +55 dBm
Single Control Line
TTL/CMOS Compatible Control
Single +5V Supply
16 Lead 3x3mm SMT Package: 9mm²
General Description
The HMC802ALP3E is a broadband bidirectional 1-bit
GaAs IC digital attenuator in a low cost leadless sur-
face mount package. This single positive control line
digital attenuator utilizes off chip AC ground capac-
itors for near DC operation, making it suitable for a
wide variety of RF and IF applications. Covering DC
to 10 GHz, the insertion loss is less than 3 dB typical
and attenuation accuracy is excellent at ±0.6 dB typ-
ical. The attenuator also features a high IIP3 of +55
dBm. One TTL/CMOS control input is used to select
the attenuation state and a single Vdd bias of +5V is
required.
Electrical Specifications, TA = +25° C, With Vdd = +5V & Vctl = 0/+5V
Parameter
Frequency (GHz)
Min.
Typ.
Insertion Loss
DC - 4 GHz
4 - 8 GHz
8 - 10 GHz
0.9
1.5
2.5
Attenuation Range
DC - 10 GHz
20
Return Loss (RF1 & RF2, Both States)
DC - 6 GHz
6 - 10 GHz
25
15
Attenuation Accuracy: (Referenced to Insertion Loss)1
DC - 6 GHz
6 - 8 GHz
8 - 10 GHz
-1.0 -0.6/+0.5
-2.0 -1.6/+0.5
-2.6 -2.3/+0.8
Input Power for 0.1 dB Compression
DC - 10 GHz
27
Input Third Order Intercept Point
(Two-Tone Input Power= 14 dBm Each Tone)
DC - 10 GHz
55
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 10 GHz
70
90
1. STEP SIZE IS 20DB FOR ALL FREQUENCY
Max.
1.7
2.8
3.5
+0.6
+0.6
+1.2
Units
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
ns
ns
Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, and to place orders: Analog Devices, Inc.,
1 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
1 page  
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Absolute Maximum Ratings
RF Input Power (DC - 10 GHz)
Control Voltage Range (V1)
Bias Voltage (Vdd)
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 12 mW/°C above 85 °C)
Thermal Resistance
(channel to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+29.3 dBm
-1 to Vdd + 1V
+7 Vdc
150 °C
0.84 W
77.4 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
Package Body Material
HMC802ALP3E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Lead Finish
100% matte Sn
MSL Rating
MSL3 [1]
Package Marking [2]
H802A
XXXX
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
4
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet HMC802ALP3E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC802ALP3E | 20 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |