DataSheetWiki


ADP5134 fiches techniques PDF

Analog Devices - 1200 mA Buck Regulators and Two 300 mA LDO Regulators

Numéro de référence ADP5134
Description 1200 mA Buck Regulators and Two 300 mA LDO Regulators
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP5134 fiche technique
Data Sheet
Dual 3 MHz, 1200 mA Buck Regulators and Two 300 mA LDO
Regulators With Precision Enable and Power-Good Output
ADP5134
FEATURES
Main input voltage range of 2.5 V to 5.5 V
Two 1200 mA buck regulators and two 300 mA LDO regulators
24-lead, 4 mm × 4 mm LFCSP package
Regulator accuracy of ±1.8%
Factory programmable or external adjustable VOUTx
Precision enable pins for easier power sequencing
Factory selectable power-good pin
3 MHz buck operation with forced PWM and automatic
PWM/PSM modes
BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V
LDO1/LDO2: output voltage range from 0.8 V to 5.2 V
LDO1/LDO2: input voltage range from 1.7 V to 5.5 V
LDO1/LDO2: high PSRR and low output noise
APPLICATIONS
Power for processors, application specific integrated circuits
(ASICs), field programmable gate arrays (FPGAs), and
radio frequency (RF) chipsets
Portable instrumentation and medical devices
Space constrained devices
GENERAL DESCRIPTION
The ADP5134 combines two high performance buck regulators
and two low dropout (LDO) regulators. It is available in a 24-lead
4 mm × 4 mm LFCSP.
The high switching frequency of the buck regulators enables tiny
multilayer external components and minimizes the board space.
When the MODE pin is set to high, the buck regulators operate in
forced pulse-width modulation (PWM) mode. When the MODE
pin is set to low, the buck regulators operate in PWM mode
when the load is above a predefined threshold. When the load
current falls below a predefined threshold, the regulator operates
in power save mode (PSM), improving the light load efficiency.
The two buck regulators operate out of phase to reduce the input
capacitor requirement. The low quiescent current, low dropout
voltage, and wide input voltage range of the ADP5134 LDO
regulators extend the battery life of portable devices. The
ADP5134 LDO regulators maintain power supply rejection
greater than 60 dB for frequencies as high as 10 kHz while
operating with a low headroom voltage of 500 mV.
VIN
2.5V TO
5.5V
VINLDO1
1.7V TO
5.5V
VINLDO2
1.7V TO
5.5V
TYPICAL APPLICATION CIRCUIT
C1
4.7µF
VIN1
16
ON EN1
OFF
12
BUCK1
1.2A
C3
4.7µF
ON
OFF
VIN2
3
EN2
7
C5
0.1µF
C6
1µF
ON
OFF
AVIN
17
VIN3
21
EN3
22
C8
1µF
ON
OFF
VIN4
23
EN4
2
MODE
BUCK2
1.2A
HOUSEKEEPING
LDO1
300mA
LDO2
300mA
VOUT1
10
SW1
15
FB1
11
PGND1
14
MODE
13
VOUT2
9
SW2
4
FB2
8
PGND2
5
L1 1µH
R1
R2
C2
10µF
PWM
PSM/PWM
L2 1µH
R3
R4
C4
10µF
VOUT3
20
FB3
19
R5
R6
VOUT4
24
1 FB4
R7
R8
C7
1µF
C9
1µF
POWER GOOD
PG
6
ADP5134
18
AGND
Figure 1.
VDDIO
R1
100kΩ
Regulators in the ADP5134 are activated through dedicated
enable pins. The default output voltages can be externally set in
the adjustable version or factory programmable to a wide range
of preset values in the fixed voltage version.
Table 1. Family Models
Model
ADP5023
ADP5024
ADP5034
Channels
2 Bucks, 1 LDO
2 Bucks, 1 LDO
2 Bucks, 2 LDOs
ADP5037
ADP5033
ADP5040
ADP5041
2 Bucks, 2 LDOs
2 Bucks, 2 LDOs
with 2 ENx pins
1 Bucks, 2 LDOs
1 Bucks, 2 LDOs
with supervisory
circuit, watchdog
function, and
manual reset
Maximum
Current
800 mA, 300 mA
1.2 A, 300 mA
1.2 A, 300 mA
800 mA, 300 mA
800 mA, 300 mA
1.2 A, 300 mA
1.2 A, 300 mA
Package
LFCSP (CP-24-10)
LFCSP (CP-24-10)
LFCSP (CP-24-10),
TSSOP (RE-28-1)
LFCSP (CP-24-10)
WLCSP (CB-16-8)
LFCSP (CP-20-10)
LFCSP (CP-20-10)
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 29
Télécharger [ ADP5134 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP5130 Pressure sensor Panasonic
Panasonic
ADP5131 Pressure sensor Panasonic
Panasonic
ADP5133 800 mA Buck Regulators Analog Devices
Analog Devices
ADP5134 1200 mA Buck Regulators and Two 300 mA LDO Regulators Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche