DataSheetWiki


ADP8140 fiches techniques PDF

Analog Devices - 4-Channel High Current LED Driver

Numéro de référence ADP8140
Description 4-Channel High Current LED Driver
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP8140 fiche technique
Data Sheet
4-Channel High Current LED Driver with
Adaptable Power Control
ADP8140
FEATURES
Highly integrated feature set for a high brightness LED
driver solution with minimal external components
4 current sink channels with an adjustable current from
125 µA to 500 mA
Analog and pulse-width modulation (PWM) dimming inputs
Analog and PWM LED current outputs
2% (maximum) matching between LED channels
5% (maximum) LED current accuracy
Operates from VIN of 3 V to 30 V; higher voltages easily
accomplished with an external Zener diode
Operates with LED anode supply voltages up to 100 V dc
Feedback output controls external power source for optimal
efficiency and safety
Multiple ADP8140 IC operation in parallel to control one
power supply
Integrated error amplifier for secondary side control of
isolated power supplies
Easy connection of a temperature thermistor or light sensor
Provides robust protection of the entire system
Power supply overvoltage protection
LED overtemperature protection
LED short-circuit protection
LED open-circuit protection
IC overtemperature protection
Shorted ISET protection
Open ISET and EN protection
Standby mode for low current consumption
Fault indicator output
Small, thermally enhanced, LFCSP package (4 mm × 4 mm)
APPLICATIONS
High brightness LED lighting
Large format LED backlighting
GENERAL DESCRIPTION
The ADP8140 provides high current control of up to four LED
drivers. Each driver can sink up to 500 mA. The sink current is
programmed for all four drivers with one external resistor.
The device features a feedback output that controls an external
power supply for optimal efficiency. The ADP8140 also protects
the LEDs, power supply, and itself against thermal events, short
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
TYPICAL APPLICATION CIRCUITS
VCC
NTC
ENABLE
FAULT
ADP8140
VIN MIN
REG
VT
MODE
DIM
EN SINK1
FAULT SINK2
FB_OUT SINK3
COMP SINK4
ISET VO_SNS
EXPOSED PAD
Figure 1. ADP8140 Used with Shunt Regulator
AGND VCC BST
FB VIN
ADP2441 BUCK
REGULATOR
COMP
SW
EN PGND
PGOOD FREQ SS
ADP8140
VIN MIN
REG
VT
MODE
DIM
EN SINK1
FAULT SINK2
FB_OUT SINK3
COMP SINK4
ISET VO_SNS
EXPOSED PAD
VIN
Figure 2. ADP8140 Used with Buck
circuits, overvoltages, and LED open circuits. Multiple
ADP8140 ICs are easily connected in parallel to drive additional
LED strings or higher current LEDs. The ADP8140 is available
in a small, thermally enhanced, lead frame chip scale package
(LFCSP).
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 24
Télécharger [ ADP8140 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP8140 4-Channel High Current LED Driver Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche