DataSheetWiki


ADP5092 fiches techniques PDF

Analog Devices - Ultralow Power Energy Harvester PMUs

Numéro de référence ADP5092
Description Ultralow Power Energy Harvester PMUs
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADP5092 fiche technique
Data Sheet
Ultralow Power Energy Harvester PMUs
with MPPT and Charge Management
ADP5091/ADP5092
FEATURES
Boost regulator with maximum power point tracking (MPPT)
with dynamic sensing or no sensing mode
Hysteresis mode for best ultralight load efficiency
Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA
Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA
Input voltage operating range: 0.08 V to 3.3 V
Fast cold start from 380 mV (typical) with charge pump
Programmable shutdown point on MINOP pin based on the
input open circuit voltage (OCV)
150 mA regulated output from 1.5 V to 3.6 V
Battery terminal charging threshold (2.2 V to 5.2 V) to
support charging storage elements
Optional BACK_UP power path management
Radio frequency (RF) transmission conducive to shutting
down the switcher temporarily via microcontroller unit
(MCU) communication
APPLICATIONS
Photovoltaic (PV) cell energy harvesting
Thermoelectric generators (TEGs) energy harvesting
Industrial monitoring
Self powered wireless sensor devices
Portable and wearable devices with energy harvesting
GENERAL DESCRIPTION
The ADP5091/ADP5092 are intelligent, integrated energy
harvesting, ultralow power management unit (PMU) solutions
that convert dc power from PV cells or TEGs. These devices charge
storage elements such as rechargeable Li-Ion batteries, thin film
batteries, super capacitors, or conventional capacitors, and
power up small electronic devices and battery free systems.
The ADP5091/ADP5092 provide efficient conversion of the
harvested limited power from a 6 µW to 600 mW range with
submicrowatt operation losses. With the internal cold start circuit,
the regulator can start operating at an input voltage as low as
380 mV. After cold startup, the regulator is functional at an
input voltage range of 0.08 V to 3.3 V. An additional 150 mA
regulated output can be programmed by an external resistor
divider or the VID pin.
The MPPT control keeps the input voltage ripple in a fixed range to
maintain stable dc-to-dc boost conversion. The dynamic sensing
mode and no sensing mode, both programming regulation points
of the input voltage, allow extraction of the highest possible energy
from the harvester. A programmable minimum operation
threshold enables boost shutdown during a low input condition.
TYPICAL APPLICATION CIRCUIT
FROM MCU
PIN
REG_D0
REG_D1
VID
SW
VIN
ADP5091
HYSTERESIS
REGULATOR
AND LDO
COLD START
CHARGE PUMP
LLD
REG_OUT
REG_FB
PGOOD
SYS
TO MCU
TO MCU
SYSTEM
LOAD
FROM MCU
OPTIONAL +
PRIMARY
BATTERY
MPPT
CBP
MPPT
BOOST
CONTROL REGULATOR
BAT
REF
MINOP
CHARGE CONTROL
AND
POWER PATH
MANAGEMENT
SETSD
SETPG
DIS_SW
BACK_UP
AGND PGND
SETHYST
SETBK
TERM
+ RECHARGEABLE
BATTERY OR
SUPERCAP
Figure 1.
As a low light indicator for a microprocessor, the LLD pin of the
ADP5091 is the MINOP comparator output. However, the
REG_GOOD flag of the ADP5092 monitors the REG_OUT
voltage. In addition, the DIS_SW pin can temporarily shut down
the boost regulator and is RF transmission friendly.
The charging control function of the ADP5091/ADP5092 protects
the rechargeable energy storage, which is achieved by monitoring
the battery voltage with the programmable charging termination
voltage and the shutdown discharging voltage. In addition, a
programmable PGOOD flag monitors the SYS voltage.
An optional primary cell battery can be connected and managed
by an integrated power path management control block that is
programmable to switch the power source from the energy
harvester, rechargeable battery, and primary cell battery.
The ADP5091/ADP5092 are available in a 24-lead LFCSP and
are rated for a −40°C to +125°C temperature range.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 28
Télécharger [ ADP5092 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADP5090 Ultralow Power Boost Regulator Analog Devices
Analog Devices
ADP5091 Ultralow Power Energy Harvester PMUs Analog Devices
Analog Devices
ADP5092 Ultralow Power Energy Harvester PMUs Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche