DataSheetWiki


AD5246 fiches techniques PDF

Analog Devices - 128-Position I2C-Compatible Digital Resistor

Numéro de référence AD5246
Description 128-Position I2C-Compatible Digital Resistor
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





AD5246 fiche technique
Data Sheet
FEATURES
128 positions
End-to-end resistance: 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ
Ultracompact, SC70-6 (2 mm × 2.1 mm) package
I2C-compatible interface
Full read/write of wiper register
Power-on preset to midscale
Single-supply 2.7 V to 5.5 V
Rheostat mode temperature coefficient: 45 ppm/°C
Low power, IDD = 0.9 µA at 3.3 V typical
Wide operating temperature range: −40°C to +125°C
APPLICATIONS
Mechanical potentiometer replacement in new designs
Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
RF amplifier-biasing
LCD brightness and contrast adjustment
Automotive electronics adjustment
Gain control and offset adjustment
GENERAL DESCRIPTION
The AD5247 provides a compact, 2 mm × 2.1 mm, packaged
solution for 128-position adjustment applications. This device
performs the same electronic adjustment function as a mechanical
potentiometer or a variable resistor. Available in four different
end-to-end resistance values (5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ),
these low temperature coefficient devices are ideal for high
accuracy and stability variable resistance adjustments.
The wiper settings are controllable through the I2C-compatible
digital interface, which can also be used to read back the present
wiper register control word. The 10 kΩ and 100 kΩ options each
128-Position I2C-Compatible
Digital Potentiometer
AD5247
FUNCTIONAL BLOCK DIAGRAM
VDD
SDA
SCL
I2C INTERFACE
A
W
WIPER
REGISTER
B
GND
Figure 1.
have three hard-coded slave address options available to allow
users access to three of these devices on one I2C bus (see Table 8
for a full list of slave address locations).
The resistance between the wiper and either end point of
the fixed resistor varies linearly with respect to the digital
code transferred into the RDAC latch. Note the terms digital
potentiometer, VR (variable resistor), and RDAC are used
interchangeably in this document.
Operating from a 2.7 V to 5.5 V power supply and consuming
0.9 µA (3.3 V) allows the AD5247 to be used in portable
battery-operated applications.
Rev. F
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2012 Analog Devices, Inc. All rights reserved.

PagesPages 21
Télécharger [ AD5246 ]


Fiche technique recommandé

No Description détaillée Fabricant
AD524 Precision Instrumentation Amplifier Analog Devices
Analog Devices
AD5240 FAST/ COMPLETE 12-BIT A/D CONVERTERS Analog Devices
Analog Devices
AD5241 2-Channel/ 256-Position Digital Potentiometer Analog Devices
Analog Devices
AD5242 2-Channel/ 256-Position Digital Potentiometer Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche