DataSheetWiki


ADL5324 fiches techniques PDF

Analog Devices - RF Driver Amplifier

Numéro de référence ADL5324
Description RF Driver Amplifier
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





ADL5324 fiche technique
Data Sheet
FEATURES
Operation from 400 MHz to 4000 MHz
Gain of 14.6 dB at 2140 MHz
OIP3 of 43.1 dBm at 2140 MHz
P1dB of 29.1 dBm at 2140 MHz
Noise figure of 3.8 dB
Dynamically adjustable bias
Adjustable power supply bias: 3.3 V to 5 V
Low power supply current: 62 mA to 133 mA
No bias resistor needed
Operating temperature range of −40°C to +105°C
SOT-89 package, MSL-1 rated
ESD rating of ±3 kV (Class 2)
APPLICATIONS
Wireless infrastructure
Automated test equipment
ISM/AMR applications
GENERAL DESCRIPTION
The ADL5324 incorporates a dynamically adjustable biasing
circuit that allows for the customization of OIP3 and P1dB
performance from 3.3 V to 5 V, without the need for an external
bias resistor. This feature gives the designer the ability to tailor
driver amplifier performance to the specific needs of the design.
This feature also creates the opportunity for dynamic biasing of
the driver amplifier where a variable supply is used to allow for
full 5 V biasing under large signal conditions, and then reduced
supply voltage when signal levels are smaller and lower power
consumption is desirable. This scalability reduces the need to
evaluate and inventory multiple driver amplifiers for different
output power requirements, from 25 dBm to 29 dBm output
power levels.
The ADL5324 is also rated to operate across the wide temperature
range of −40°C to +105°C for reliable performance in designs
that experience higher temperatures, such as power amplifiers.
The ½ W driver amplifier also covers the wide frequency range
of 400 MHz to 4000 MHz, and only requires a few external
components to be tuned to a specific band within that wide range.
This high performance broadband RF driver amplifier is well
suited for a variety of wired and wireless applications, including
cellular infrastructure, ISM band power amplifiers, defense
equipment, and instrumentation equipment. A fully populated
evaluation board is available.
400 MHz to 4000 MHz
½ Watt RF Driver Amplifier
ADL5324
FUNCTIONAL BLOCK DIAGRAM
GND
(2)
ADL5324
1
RFIN
BIAS
23
GND RFOUT
Figure 1.
The ADL5324 also delivers excellent ACPR vs. output power and
bias voltage. The driver can deliver greater than 17 dBm of output
power at 2140 MHz, while achieving an ACPR of −55 dBc at 5 V. If
the bias is reduced to 3.3 V, the −55 dBc ACPR output power
only minimally reduces to 15 dBm.
–30
–35
–40
–45
–50
–55
–60 SOURCE
VCC = 3.3V
–65 VCC = 5V
–70
–75
–80
–85
–20 –15 –10 –5 0 5 10 15 20 25
POUT (dBm)
Figure 2. ACPR vs. Output Power, Single Carrier W-CDMA,
TM1-64 at 2140 MHz
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062−9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2012 Analog Devices, Inc. All rights reserved.

PagesPages 21
Télécharger [ ADL5324 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADL5320 400 MHz to 2700 MHz RF Driver Amplifier Analog Devices
Analog Devices
ADL5321 2.3 GHz to 4.0 GHz RF Driver Amplifier Analog Devices
Analog Devices
ADL5322 GaAs Matched RF PA Predriver Analog Devices
Analog Devices
ADL5323 GaAs Matched RF PA Predriver Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche