DataSheet39.com

What is FM8PU86LK?

This electronic component, produced by the manufacturer "Feeling Technology", performs the same function as "Full-Speed USB Controller".


FM8PU86LK Datasheet PDF - Feeling Technology

Part Number FM8PU86LK
Description Full-Speed USB Controller
Manufacturers Feeling Technology 
Logo Feeling Technology Logo 


There is a preview and FM8PU86LK download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! FM8PU86LK datasheet, circuit

FEELING
TECHNOLOGY
FM8PU86LK
FM8PU86LK
Full-Speed USB Controller
Datasheet V05
March 12 2010
P.1 Rev05 March 12, 2010
FM8PU86LK

line_dark_gray
FM8PU86LK equivalent
FEELING
TECHNOLOGY
FM8PU86LK
1.0 General Description
The FM8PU86LK is an 8-bit microprocessor embedded device tailored to the USB application. It
includes an 8-bit RISC CPU core, 192 byte SRAM, Full Speed and Low Speed USB Interface and a 6K
x 14 internal program OTP-ROM.
2.0 Features
USB Specification Compliance
Support Full-Speed and Low-Speed USB 2.0 specification.
Built-in USB Transceiver.
Built-in 1.5k pull-high resistor.
Support one address and four 8-byte and two 32-byte data endpoints.
Support USB Suspend and Resume function.
One Control IN/OUT endpoints, four INT/BULK endpoints.
8-bit RISC microprocessor
6K x 14 internal program OTP-ROM.
256 bytes internal SRAM.
Optional 12MHz/24MHz internal MCU clock by configuration.
Optional Default/16MHz/12MHz/6MHz/58KHz internal MCU clock by firmware.
One Watch dog Timer ,Timer0,Timer1,and two captures Timers.
System Clock
Clock Generator
0.25% Accuracy after OTP calibration.
Internal slow oscillator 58KHz free run clock for suspend mode.
38-I/O ports
High current drive on any GPIO pin : 25mA/pin current sink.
Each GPIO pin supports high-impedance input, internal pull-ups,
open drains output, or CMOS outputs.
Power Manager and consumption
Power on reset (POR) is 2.0V
Chip can work on greater than 2.2V power.
Low Voltage Detect is 3.8V
Regulator 3.3V output, supply 45mA current.
GPIO supply 1.8V~5V interface.
Support SSC to reduce EMI.
Package
LQFP-48PIN
Type is FM8PU86LKA3 for GPIO 3.3V interface.
Type is FM8PU86LKA5 for GPIO 5.0V interface.
QFP-44PIN
Type is FM8PU86LKB3 for GPIO 3.3V interface.
Type is FM8PU86LKB5 for GPIO 5.0V interface
DIP-40PIN
Type is FM8PU86LKC3 for GPIO 3.3V interface.
Type is FM8PU86LKC5 for GPIO 5.0V interface.
P.5 Rev05 March 12, 2010
FM8PU86LK


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FM8PU86LK electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ FM8PU86LK.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
FM8PU86LKThe function is Full-Speed USB Controller. Feeling TechnologyFeeling Technology
FM8PU86LVThe function is Low Power Full-Speed USB Controller. FEELING TECHNOLOGYFEELING TECHNOLOGY

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

FM8P     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search