|
|
PDF NCB210X1 Data sheet ( Hoja de datos )
| Número de pieza | NCB210X1 | |
| Descripción | LCD Monitor Interface Controller | |
| Fabricantes | Kordis Media | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NCB210X1 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
Data Sheet NCB210X1
For LCD Monitor (PC Only) Interface Controller
For 800X600, 1024X768 Resolutions TFT LCD
DATA SHEET
TFT LCD Monitor Control Board
NCB210X1-DS-AC ( RoHS Compliant )
OCT. 2006
1
Kordis Media Co., ltd.
3F, 1006-9, Sadang-Dong,
Dongjak-Ku, Seoul
156-090, Korea
TEL : 82-2-585-8347
FAX : 82-2-585-8391
Kordis Media Co.,ltd
1 page  
Data Sheet NCB210X1
GENERAL SPECIFICATION
No. Item
1 Model name
For SVGA Panel
For XGA Panel
Description
NCB210S1
NCB210X1
2 LCD Module
3 Signal Input
Resolution
4
Support
OSD Control
5
Plug & Play
6 Power Connector
7. Power Consumption
8 Signal Connector
SVGA, XGA
Analog RGB Input
H: 31 ∼ 80kHz
V: 55 ∼ 76Hz
Menu, Left, Right, Up, Down, Source, Power
VESA DDC 2B Ver1.3
Input
Type: IEC320 MALE 3Line Connector
Supply Voltage
12VDC
Max Power
35W (With Back Light Inverter)
Analog
DSUB 15P(R, G, B Separate H, V Sync)
Notes 1) Depends On Panel Resolution
- S : SVGA (800X600)
- X : XGA (1024X768)
Note 1)
5 keys
5 Kordis Media Co.,ltd
5 Page 
Data Sheet NCB210X1
CONNECTION & OPERATION
CAUTION: Never connect or disconnect parts of the display system when the system is powered up as this may cause serious
damage.
CONNECTION
1. LCD panel & Inverter: Connect the inverter (if it is not built- in the panel) to the CCFT lead connector of the LCD
panel.
2. LVDS type panels: Plug the signal cables direct to J14 of the controller board for VGA, SVGA or XGA resolution
Panel or J11 for SXGA resolution panel. Plug the other end of cables to the LCD connector board.
3. Inverter & Controller: Plug the inverter cable to J5 of the controller board and another end to the connector on
the inverter.
4. Function switch & Controller: Plug the OSD switch mount cable to J9 or J17 of the controller board and another
end to the OSD board.
5. Jumpers & Switch: Check all jumpers J12 (Target panel power is setting) and J4 (Target Panel Option switch) are set
correctly. Details referring the jumpers and switches setting table (in the following section)
6. VGA cable & Controller: Plug the VGA cable to the connector J6 or J1 of the controller board.
7. DIV-D Cable & Controller: Plug the DVI-D Cable to the connector J3 or J13 of the controller board.
8. Power supply & Controller: Plug the DC 12V power in to the connector J2 or J8.
9. Power on: Switch on the controller board and panel by using the OSD switch mount.
General:
If you use supplied cables & accessories, ensure that they are correct for the model of the panel and the controller.
If you make your own cables & connectors, refer carefully to both the panel & inverter specifications and the section
in this manual, “Connectors, Pin outs & Jumpers” to ensure the correct pin to pin wiring.
PC Setting:
The controller has been designed to take a very wide range of input signals however to optimize the PC’s graphic
performance we recommend choosing 60Hz vertical refresh rate – this will not cause screen flicker.
11 Kordis Media Co.,ltd
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet NCB210X1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NCB210X1 | LCD Monitor Interface Controller | Kordis Media |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |