HDSP-0793 Datasheet PDF - Agilent
| Part Number | HDSP-0793 | |
| Description | Glass/Ceramic Numeric and Hexadecimal Displays | |
| Manufacturers | Agilent | |
| Logo |  |
|
|
There is a preview and HDSP-0793 download ( pdf file ) link at the bottom of this page. Total 8 Pages | ||
Preview 1 page No Preview Available !
Glass/Ceramic Numeric and
Hexadecimal Displays for
Industrial Applications
Technical Data
HDSP-078x
HDSP-079x
HDSP-088x
HDSP-098x
www.DataSheet4U.com
Features
• Three Character Options
Numeric, Hexadecimal, Over
Range
• Three Colors
High Efficiency Red, Yellow,
High Performance Green
• 4 x 7 Dot Matrix Character
• High Efficiency Red, Yellow
and High Performance Green
• Two High Efficiency Red
Options
Low Power, High Brightness
• Performance Guaranteed
Over Temperature
• High Temperature Stabilized
• Memory Latch/Decoder/
Driver
TTL Compatible
• Categorized for Luminous
Intensity
Description
These standard solid state displays
have a 7.4 mm (0.29 inch) dot
matrix character and an on-board
IC with data memory latch/
decoder and LED drivers in a
glass/ceramic package.
The hermetic HDSP-078x,-079x/
-088x displays utilize a solder
glass frit seal. The HDSP-098X
displays utilize an epoxy glass-to-
ceramic seal.
The numeric devices decode posi-
tive BCD logic into characters
“0-9,” a “–” sign, decimal point,
and a test pattern. The
hexadecimal devices decode
positive BCD logic into 16
characters, “0-9, A-F.” An input is
provided on the hexadecimal
devices to blank the display (all
LEDS off) without losing the
contents of the memory.
The over range device displays
“± 1” and right hand decimal
point and is typically driven via
external switching transistors.
Devices
Part Number HDSP-
0781
0782
0783
0784
0791
0792
0793
0794
0881
0882
0883
0884
0981
0982
0983
0984
Color
High-Efficiency Red
Low Power
High-Efficiency Red
High Brightness
Yellow
High-Performance Green
Description
Numeric, Right Hand DP
Numeric, Left Hand DP
Over Range ± 1
Hexadecimal
Numeric, Right Hand DP
Numeric, Left Hand DP
Over Range ± 1
Hexadecimal
Numeric, Right Hand DP
Numeric, Left Hand DP
Over Range ± 1
Hexadecimal
Numeric, Right Hand DP
Numeric, Left Hand DP
Over Range ± 1
Hexadecimal
Front View
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
|
| |
 
5
Mechanical
These displays are hermetically
sealed for use in environments
that require a high reliability
device. These displays are
designed and tested to meet a
helium leak rate of
5 x 10-8 cc/sec.
These displays may be mounted
by soldering directly to a printed
circuit board or insertion into a
socket. The lead-to-lead pin
spacing is 2.54 mm (0.100 inch)
and the lead row spacing is 15.24
mm (0.600 inch). These displays
may be end stacked with 2.54
mm (0.100 inch) spacing
between outside pins of adjacent
displays. Sockets such as Augat
324-AG2D (3 digits) or Augat
508-AG8D (one digit, right angle
mounting) may be used.
The primary thermal path for
power dissipation is through the
device leads. Therefore, to insure
reliable operation up to an
ambient temperature of +100°C,
it is important to maintain a
base-to-ambient thermal
resistance of less than
35°C watt/device as measured on
top of display pin 3.
For further information on
soldering and post solder
cleaning, see Application Note
1027, Soldering LED
Components.
Absolute Maximum Ratings
Description
Symbol Min Max Unit
Storage Temperature, Ambient
Operating Temperature, Ambient
TS
TA
–65 +125
–55 +100
°C
°C
Forward Current, Each LED
IF
10 mA
Reverse Voltage, Each LED
VR
5V
Preconditioning
These displays are 100% pre-
conditioned by 24 hour storage at
125°C, at 100°C for the HDSP-
098x Series.
Contrast Enhancement
These display devices are
designed to provide an optimum
ON/OFF contrast when placed
behind an appropriate contrast
enhancement filter. For further
information on contrast
enhancement, see Application
Note 1015, Contrast
Enhancement for LED
Displays.
Over Range Display
The over range devices display
“±1” and decimal point. The
character height and package
configuration are the same as the
numeric and hexadecimal
devices. Character selection is
obtained via external switching
transistors and current limiting
resistors.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HDSP-0793 electronic component. |
| Information | Total 8 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HDSP-0793.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HDSP-0791 | The function is Glass/Ceramic Numeric and Hexadecimal Displays. Agilent | |
| HDSP-0792 | The function is Glass/Ceramic Numeric and Hexadecimal Displays. Agilent | |
| HDSP-0793 | The function is Glass/Ceramic Numeric and Hexadecimal Displays. Agilent | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HDSP
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||