DataSheetWiki


FPF3003 fiches techniques PDF

Fairchild Semiconductor - Full Functional Input Power Path Management Switch

Numéro de référence FPF3003
Description Full Functional Input Power Path Management Switch
Fabricant Fairchild Semiconductor 
Logo Fairchild Semiconductor 





1 Page

No Preview Available !





FPF3003 fiche technique
July 2012
FPF3003
IntelliMAX™ Full Functional Input Power Path
Management Switch for Dual-Battery Portable System
Features
2.3V to 5.5V Input Voltage Operating Range
Low RON between Battery and Load
Maximum 50mat VIN = 4.2V
Low RON between Charger and Battery
Maximum 125mat VIN = 4.2V
Maximum DC Current for Load Switch: 2.5A
Maximum DC Current for Charge Switch: 1.5A
Slew Rate Controlled to 30µs Nominal Rise Time
Seamless Break-Before-Make Transition
Quiescent Current: 30µA Typical
Thermal Shutdown
Reverse Current Blocking (RCB) between Battery A
and Battery B
RESET Timer Delay: 7s Typical
ESD Protected:
- Human Body Model: >2.5kV
- Charged Device Model: >1.5kV
- IEC 61000-4-2 Air Discharge: >15kV
- IEC 61000-4-2 Contact Discharge: >8kV
1.6mm X 1.6mm, 16-Bump, 0.4mm Pitch, WLCSP
Applications
Dual-Battery Cell phone
Dual-Battery Portable Equipment
Description
The FPF3003 is a single-chip solution for dual-battery
power-path switching, including integrated P-channel
switches and analog control features. The input voltage
range operates from 2.3V to 5.5V. The device selects
one of two batteries to provide power to the system,
enabling one battery to be charged by the external
battery charger.
The FPF3003 has battery voltage monitoring to
determine if the battery is under voltage. Special driver
and digital circuitry allows the device to switch quickly
between battery A and battery B, which allows hot
swapping of battery packs. Maximum current from
battery to load per channel is limited to a constant 2.5A
and internal thermal shutdown circuits protect the part
during fault conditions.
The FPF3003 is available in a 1.6mm x 1.6mm,
16-bump, Wafer-Level Chip-Scale Package (WLCSP).
Ordering Information
Part Number Top Mark
(Charger-Battery)
Max. RON at 4.2VIN
FPF3003UCX
QW
125m
(Battery-Load)
Max. RON at 4.2VIN
50m
Typical
tR
Package
30µs
16-Bump, 0.4mm Pitch,
1.6mm x 1.6mm WLCSP
© 2011 Fairchild Semiconductor Corporation
FPF3003 • Rev. 1.0.0
www.fairchildsemi.com

PagesPages 18
Télécharger [ FPF3003 ]


Fiche technique recommandé

No Description détaillée Fabricant
FPF3003 Full Functional Input Power Path Management Switch Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche