DataSheetWiki


AD8361 fiches techniques PDF

Analog Devices - LF to 2.5 GHz TruPwr Detector

Numéro de référence AD8361
Description LF to 2.5 GHz TruPwr Detector
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





AD8361 fiche technique
Data Sheet
FEATURES
Calibrated rms response
Excellent temperature stability
Up to 30 dB input range at 2.5 GHz
700 mV rms, 10 dBm, re 50 Ω maximum input
±0.25 dB linear response up to 2.5 GHz
Single-supply operation: 2.7 V to 5.5 V
Low power: 3.3 mW at 3 V supply
Rapid power-down to less than 1 µA
APPLICATIONS
Measurement of CDMA, W-CDMA, QAM, other complex
modulation waveforms
RF transmitter or receiver power measurement
GENERAL DESCRIPTION
The AD8361 is a mean-responding power detector for use in
high frequency receiver and transmitter signal chains, up to
2.5 GHz. It is very easy to apply. It requires a single supply only
between 2.7 V and 5.5 V, a power supply decoupling capacitor,
and an input coupling capacitor in most applications. The
output is a linear-responding dc voltage with a conversion gain
of 7.5 V/V rms. An external filter capacitor can be added to
increase the averaging time constant.
3.0
2.8 SUPPLY
2.6 REFERENCE MODE
2.4
2.2
INTERNAL
2.0 REFERENCE MODE
1.8
1.6
1.4
1.2 GROUND
REFERENCE MODE
1.0
0.8
0.6
0.4
0.2
0.0
0
0.1 0.2 0.3 0.4
RFIN (V rms)
0.5
Figure 1. Output in the Three Reference Modes, Supply 3 V, Frequency 1.9 GHz
(6-Lead SOT-23 Package Ground Reference Mode Only)
LF to 2.5 GHz
TruPwr™ Detector
AD8361
FUNCTIONAL BLOCK DIAGRAMS
RFIN
PWDN
χ2 i
TRANS-
CONDUCTANCE
CELLS
χ2 i
INTERNAL FILTER
ERROR
AMP
AD8361
× 7.5
BUFFER
VPOS
FLTR
VRMS
BAND-GAP
REFERENCE
ADD
OFFSET
SREF
COMM
IREF
Figure 2. 8-Lead MSOP
RFIN
χ2 i
TRANS-
CONDUCTANCE
CELLS
χ2 i
INTERNAL FILTER
ERROR
AMP
AD8361
× 7.5
BUFFER
VPOS
FLTR
VRMS
PWDN
BAND-GAP
REFERENCE
COMM
IREF
Figure 3. 6-Lead SOT-23
The AD8361 is intended for true power measurement of simple
and complex waveforms. The device is particularly useful for
measuring high crest-factor (high peak-to-rms ratio) signals,
such as CDMA and W-CDMA.
The AD8361 has three operating modes to accommodate a
variety of analog-to-digital converter requirements:
1. Ground reference mode, in which the origin is zero.
2. Internal reference mode, which offsets the output 350 mV
above ground.
3. Supply reference mode, which offsets the output to VS/7.5.
The AD8361 is specified for operation from −40°C to +85°C
and is available in 8-lead MSOP and 6-lead SOT-23 packages. It
is fabricated on a proprietary high fT silicon bipolar process.
Rev. F
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©1999–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

PagesPages 23
Télécharger [ AD8361 ]


Fiche technique recommandé

No Description détaillée Fabricant
AD8361 LF to 2.5 GHz TruPwr Detector Analog Devices
Analog Devices
AD8362 50 Hz to 3.8 GHz 65 dB TruPwr Detector Analog Devices
Analog Devices
AD8363 50 dB TruPwr Detector Analog Devices
Analog Devices
AD8364 LF to 2.7 GHz Dual 60 dB TruPwr Detector Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche