DataSheetWiki


uClamp0544P fiches techniques PDF

Semtech Corporation - 4-Line ESD Protection

Numéro de référence uClamp0544P
Description 4-Line ESD Protection
Fabricant Semtech Corporation 
Logo Semtech Corporation 





1 Page

No Preview Available !





uClamp0544P fiche technique
PROTECTION PRODUCTS - MicroClampTM
Description
The μClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace single line devices such
as multilayer varistors (MLVs) in space constrained ap-
plications such as cell phones, notebook computers, and
other portable electronics. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. TVS diodes offer desirable characteristics for
board level protection including fast response time, low
operating and clamping voltage, and no device degrada-
tion.
The μClampTM0544P is in a 10-pin, RoHS/WEEE compli-
ant, SLP2510P8 package. It measures 2.5 x 1.0 with
a nominal height of 0.58mm. The leads are spaced at
a pitch of 0.5mm and are finished with lead-free
NiPdAu. They are designed for easy PCB layout by
allowing the traces to run straight through the device.
Each device features four TVS diodes with an operat-
ing voltage of 5 volts and a maximum loading capaci-
tance of only 10pF.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge). The combination of small size and
high ESD surge capability makes them ideal for use in
portable applications such as cellular phones, digital
cameras, and notebook computers.
uClamp0544P
μClampTM
4-Line ESD Protection
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package
‹ Protects four data lines
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low capacitance (10pF)
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP2510P8 package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 2.5 x 1.0 x 0.58 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Notebooks & Handhelds
‹ mp3 Players
‹ Cordless Phones
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
Dimensions
Schematic
2.50
12
1.00
124 5
0.50 BSC
0.58
Nominal Dimensions (mm)
(SLP2510P8 Bottom View)
Revision 12/6/2008
3,8
Note: Pins 6, 7, 9, and 10 are not internally connected.
1 www.semtech.com

PagesPages 7
Télécharger [ uClamp0544P ]


Fiche technique recommandé

No Description détaillée Fabricant
uClamp0544P 4-Line ESD Protection Semtech Corporation
Semtech Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche