DataSheetWiki


ADT2510 fiches techniques PDF

ADTech - receiver IC

Numéro de référence ADT2510
Description receiver IC
Fabricant ADTech 
Logo ADTech 





1 Page

No Preview Available !





ADT2510 fiche technique
ADT2510
General Description
The ADT2510 is a miniaturized receiver IC for use in the infrared remote control system.
It has a wide voltage operating such as 2.7~5.5V, a high sensitivity, and good noise immunity.
It has high noise immunity from external light source disturbance which are general fluorescent
lamp, incandescent lamp etc.
It has the frequency selecting pads for setting the center frequency of band-pass filter and also
has 5 trimming Pads for the fined adjust of center frequency.
These ICs is capable of accepting a photodiode directly and include many excellent circuit such
as a high gain initial amplifier, a gain control amplifier, a limiter, a band pass filter, a detection
circuit, two comparator circuits, gain control circuits, integrator circuits, a waveform shaping
circuit assembled on a single chip.
Features
Wide Operating Supply Voltage 2.7V ~ 5.5 V
Internal voltage reference circuit for wide operating built-in.
Excellent interference safety against external light sources.
No external components necessary.
The Center Frequency can be varied with option PADs
( 36.0kHz, 37.9kHz, 40.0kHz, 56.7kHz)
Internal filter for a high frequency lighting fluorescent lamp.
Built-in automatic bias control for sunlight.
Output active low.
Absolute Maximum Ratings
Parameter
Supply Voltage
Output Voltage
Output Current
Operating Temperature
Storage Temperature
Symbol
Vcc
Vout
Iout
Topr
Tst
Min.
0
0
0
-20
-40
Max.
6.0
6.0
2.5
80
125
Unit
V
V
mA
* Stress above those listed under Absolute Maximum Ratings may cause permanent damage of device.
This is stress rating only and functional operation of the device at these or any other conditions above those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for longer periods may affect device reliability.
During overload conditions (VIN>Vcc or VIN<GND), those voltage on Vcc pins with respect to ground must
not exceed the values defined by the absolute maximum ratings.
* This specifications are subject to be changed without notice
Feb. 02. 2007 / Rev. 0.1 1/4 http://www.ad-tech.co.kr

PagesPages 4
Télécharger [ ADT2510 ]


Fiche technique recommandé

No Description détaillée Fabricant
ADT2510 receiver IC ADTech
ADTech

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche