DataSheetWiki


OB2530P fiches techniques PDF

On-Bright Electronics - High Precision CC/CV Primary-Side Power Switch

Numéro de référence OB2530P
Description High Precision CC/CV Primary-Side Power Switch
Fabricant On-Bright Electronics 
Logo On-Bright Electronics 





1 Page

No Preview Available !





OB2530P fiche technique
OB2530P
High Precision CC/CV Primary-Side Power Switch
GENERAL DESCRIPTION
OB2530P is a high performance offline PSR power
switch for low power AC/DC charger and adapter
applications. It operates in primary-side sensing
and regulation. Consequently, opto-coupler and
TL431 could be eliminated. Proprietary Constant
Voltage (CV) and Constant Current (CC) control is
integrated as shown in the figure below.
In CC control, the current and output power setting
can be adjusted externally by the sense resistor
Rs at CS pin. In CV control, multi-mode operations
are utilized to achieve high performance and high
efficiency. In addition, good load regulation is
achieved by the built-in cable drop compensation.
Device operates in PFM in CC mode at large load
condition and it operates in PWM with frequency
reduction at light/medium load. The chip
consumes very low operation current. It achieves
less than 75mW standby power to meet strict
standby power standard.
OB2530P offers comprehensive protection
coverage with auto-recovery feature including
Cycle-by-Cycle current limiting, VDD over voltage
protection, feedback loop open protection, short
circuit protection, built-in leading edge blanking,
VDD under voltage lockout (UVLO), OTP etc.
OB2530P is offered in DIP8 packages.
Figure.1. Typical CC/CV Curve
TYPICAL APPLICATION
FEATURES
Primary-side sensing and regulation without
TL431 and opto-coupler
High precision constant voltage and current
regulation at universal AC input
Multi-mode PWM/PFM operation for efficiency
improving
Integrated 2A 650V MOSFET
Good dynamic response
Programmable CV and CC regulation
Built-in primary winding inductance
compensation
Programmable cable drop compensation
No need for control loop compensation
Audio noise free operation
Built-in leading edge blanking (LEB)
Ultra low start-up current and low operating
current
Comprehensive protection coverage with
auto-recovery
VDD over voltage protection
VDD under voltage lockout with
hysteresis (UVLO)
Cycle-by-Cycle current limiting
Feedback loop open protection
Output short circuit protection
On-chip OTP
APPLICATIONS
Low Power AC/DC offline SMPS for
Cell Phone Charger
Digital Cameras Charger
Small Power Adapter
Auxiliary Power for PC, TV etc.
Linear Regulator/RCC Replacement
©On-Bright Electronics
Confidential
-1-
Datasheet
OB_DOC_DS_2530PA0

PagesPages 10
Télécharger [ OB2530P ]


Fiche technique recommandé

No Description détaillée Fabricant
OB2530N High Precision CC/CV Primary-Side Power Switch On-Bright Electronics
On-Bright Electronics
OB2530P High Precision CC/CV Primary-Side Power Switch On-Bright Electronics
On-Bright Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche