DataSheetWiki


DG411F fiches techniques PDF

Maxim Integrated - SPST Analog Switches

Numéro de référence DG411F
Description SPST Analog Switches
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





DG411F fiche technique
19-2418; Rev 0; 4/02
Quad, Rail-to-Rail, Fault-Protected,
SPST Analog Switches
General Description
The DG411F/DG412F/DG413F are quad, single-pole/sin-
gle-throw (SPST), fault-protected analog switches. They
are pin compatible with the industry-standard nonpro-
tected DG411/DG412/DG413. These new switches fea-
ture fault-protected inputs and Rail-to-Railsignal-
handling capability. All terminals are protected from
overvoltage faults up to ±36V with power on and up to
±40V with power off. During a fault condition, the COM,
NO, or NC terminal becomes an open circuit and only
microamperes of leakage current flow from the source.
On-resistance is 35(max) and is matched between
switches to 1.5(max) at +25°C.
The DG411F has four normally closed (NC) switches.
The DG412F has four normally open (NO) switches.
The DG413F has two NC and two NO switches. These
CMOS switches operate with dual power supplies rang-
ing from ±4.5V to ±20V or a single supply between +9V
and +36V. All digital inputs have +0.8V and +2.4V logic
thresholds, ensuring both TTL and CMOS logic com-
patibility when using ±15V or a single +12V supply.
For supply voltages of ±5V, +5V, and +3V, refer to the
MAX4711/MAX4712/MAX4713 data sheet.
Applications
Communication Systems
Signal Routing
Test Equipment
Data Acquisition
Industrial and Process Control Systems
Avionics
Redundant/Backup Systems
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Functional Diagram appears at end of data sheet.
Pin Configurations continued at end of data sheet.
Features
o No Power-Supply Sequencing Required
o Rail-to-Rail Signal Handling
o All Switches Off with Power Off
o All Switches Off when V+ is Off and V- is On
o ±40V Fault Protection with Power Off
o ±36V Fault Protection with ±15V Supplies
o Control Line Fault Protection from
V- - 0.3V to V- + 40V
o Pin Compatible with Industry-Standard
DG411/DG412/DG413
o 20ns (typ) Fault Response Time
o 35(max) RON with ±15V Supplies
o ±4.5V to ±20V Dual Supplies
o +9V to +36V Single Supply
o TTL- and CMOS-Compatible Logic Inputs with
±15V or Single +9V to +15V Supplies
Ordering Information
PART
DG411FEUE
DG411FDY
DG411FDJ
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
16 TSSOP
16 SO
16 Plastic DIP
Ordering Information continued at end of data sheet.
Pin Configurations
TOP VIEW
IN1 1
COM1 2
NC1 3
V- 4
GND 5
NC4 6
COM4 7
IN4 8
DG411F
16 IN2
15 COM2
14 NC2
13 V+
12 N.C.
11 NC3
10 COM3
9 IN3
DIP/TSSOP/SO
DG411F
LOGIC SWITCH
0 ON
1 OFF
N.C. = NOT CONNECTED. SWITCHES SHOWN FOR LOGIC 0 INPUT.
ALL SWITCHES ARE OFF WITH POWER REMOVED.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 16
Télécharger [ DG411F ]


Fiche technique recommandé

No Description détaillée Fabricant
DG411 Monolithic Quad SPST / CMOS Analog Switches Intersil
Intersil
DG411 SPST Analog Switches Maxim Integrated
Maxim Integrated
DG411 Precision Monolithic Quad SPST CMOS Analog Switches Vishay
Vishay
DG411F SPST Analog Switches Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche