|
|
PDF NL3S22S Data sheet ( Hoja de datos )
| Número de pieza | NL3S22S | |
| Descripción | USB 2.0 + Audio Switch | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NL3S22S (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
NL3S22S
USB 2.0 + Audio Switch
The NL3S22S is a double−pole/double−throw (DPDT) analog
switch for routing high speed differential data and audio. The
high−speed data path is compliant with High Speed USB 2.0, Full
Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol.
The multi−purpose audio path is capable of passing signals with
negative voltages as low as 2 V below ground and features shunt
resistors to reduce Pop and Click noise in the audio system.
Features
• VCC Range: 2.7 V to 5.5 V
• Control Pins Compatible with 1.8 V Interfaces
• ICC: 23 mA (Typ)
• ESD Performance: 4 kV HBM
• Available in1.4 mm x 1.8 mm UQFN10
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
High Speed Data Path
• Input Signal Range: 0 V to 3.7 V
• RDS(on): 5 W (Typ)
• CON: 4.5 pF (Typ)
• Data Rate: USB 2.0–Compliant – up to 480 Mbps
Audio Path
• Input Signal Range: −2.0 V to 2.0 V
• RDSON: 3 W (Typ)
• RON(FLAT): 0.002 W (Typ)
• THD: 0.002% (RL = 16 W / VIS = 0.4 VRMS)
Applications
• Smartphones
• Tablets
• USB 2.0 Hosts/Peripherals
• Audio / High−Speeds Data Switching
www.onsemi.com
MARKING
DIAGRAM
UQFN10
AW MG
1
CASE 488AT
G
AW = Device Code
M = Date Code
G = Pb−Free Device
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package Shipping†
NL3S22SMUTAG
UQFN10 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
October, 2016 − Rev. 0
1
Publication Order Number:
NL3S22S/D
1 page  
NL3S22S
AC ELECTRICAL CHARACTERISTICS (Typical values are at VCC = +3.6 V and TA = +25 ⁰C)
−40 ⁰C to 85 ⁰C
Symbol
Parameter
AUDIO SWITCH (AUDP/AUDN e D+/D−)
Test Conditions
VCC (V) Min Typ Max Unit
THD
Audio THD
f = 20 Hz to 20 kHz, VIS = 0.4 VRMS, 2.7 – 5.5 − 0.002 −
DC Bias = 0 V, RL = 16 W
PSRR
Power Supply Ripple
Rejection
From VCC unto AUDP/AUDN,
f = 217 Hz, RL = 16 W
2.7 – 5.5
−
118
−
DATA SWITCH (HDP/HDN e D+/D−)
%
dB
CON
Equivalent
ON−Capacitance
Switch ON, f = 1 MHz
3.6
− 4.84 −
pF
COFF
Equivalent
OFF−Capacitance
Switch OFF, f = 1 MHz
3.6
− 2.06 −
pF
DIL Differential Insertion
Loss
f = 10 MHz
f = 800 MHz
2.7 – 5.5 − −0.42 −
2.7 – 5.5 − −1.89 −
dB
f = 1.1 GHz
2.7 – 5.5 − −3.01 −
DISO
Differential Off−Isolation
f = 10 MHz
f = 800 MHz
2.7 – 5.5
−
−60
−
2.7 – 5.5
−
−15
−
dB
f = 1.1 GHz
2.7 – 5.5
−
−15
−
DCTK
Differential Crosstalk
f = 10 MHz
f = 800 MHz
2.7 – 5.5
−
−67
−
2.7 – 5.5
−
−23
−
dB
f = 1.1 GHz
2.7 – 5.5
−
−19
−
PSRR
Power Supply Ripple
Rejection
DYNAMIC TIMING
From VCC unto D+/D−,
f = 217 Hz, RL = 50 W
2.7 – 5.5
−
108
−
dB
tPD Propagation Delay
(Notes 5 and 6)
VNOn or VNCn = 0V, RL = 50 W,
2.7 – 5.5
−
0.25
−
ns
tON Turn−On Time
VIS = 1 V, RL = 50 W, CL = 7 pF (fix-
ture only)
2.7 – 5.5
ms
EN or SEL to AUDP/AUDN
− 2.2 −
EN or SEL to HDP/HDN
− 6.2 −
tOFF
Turn−Off Time
VIS = 1 V, RL = 50 W, CL = 7 pF (fix-
ture only)
2.7 – 5.5
ns
EN or SEL to AUDP/AUDN
− 67 −
EN or SEL to HDP/HDN
− 1200 −
tsk(b−b)
Bit to bit skew
Within the same differential channel 2.7 – 5.5
−
5
− ps
tsk(ch−ch) Channel to channel skew
Maximum skew between all chan-
2.7 – 5.5
−
5
− ps
nels
5. Guaranteed by design.
6. No other delays than the RC network formed by the load resistance and the load capacitance of the switch are added on the bus. For a 10
pF load, this delay is 5 ns which is much smaller than rise and fall time of typical driving systems. Propagation delays on the bus are
determined by the driving circuit on the driving side and its interactions with the load of the driven side.
www.onsemi.com
5
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet NL3S22S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NL3S2223 | High-Speed USB 2.0 (480 Mbps) DPDT Switches | ON Semiconductor |
| NL3S22S | USB 2.0 + Audio Switch | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |